Wolfgang 3 long throw?

[timmy6262]

Not including the sealant in this but how are the other three products(Uber compound, Swirl Remover and the not Glaze, thanks Mike) in that line when working with a 21mm throw? I am looking to maybe buy a couple new things to try them out. I used the sealant and was amazed so thought about getting into that product line some more.

Sent from my PH-1 using Autogeekonline mobile app

[Mike Phillips]

Yes.

The Wolfgang compound, swirl remover and glaze work phenomenal with any orbital polisher.


Also - not so much for you but for anyone reading this into the future - the glaze is NOT a glaze, it's a fine cut polish. Not sure who named it but it causes a lot of confusion.

[timmy6262]

Yes.

The Wolfgang compound, swirl remover and glaze work phenomenal with any orbital polisher.


Also - not so much for you but for anyone reading this into the future - the glaze is NOT a glaze, it's a fine cut polish. Not sure who named it but it causes a lot of confusion.

I am currently using the BOSS system and assuming that the three Wolfgang compare similar to that system as in Uber compound=FCC, Swirl Remover=CC and the fine cut polish=Perfecting Cream?

Sent from my PH-1 using Autogeekonline mobile app

[PaulMys]

I am currently using the BOSS system and assuming that the three Wolfgang compare similar to that system as in Uber compound=FCC, Swirl Remover=CC and the fine cut polish=Perfecting Cream?

Sent from my PH-1 using Autogeekonline mobile app

You are correct.

And wanting to try new products is natural. WG makes some incredible products, and I own quite a few.

That said, the Griot's Boss line is on par with just about anything out there.

JMO

[timmy6262]

You are correct.

And wanting to try new products is natural. WG makes some incredible products, and I own quite a few.

That said, the Griot's Boss line is on par with just about anything out there.

JMO

I have had no complaints with my BOSS creams but I went to use the correcting cream and it came out of the bottle very runny after a lot of shaking to say the least. I have some small stainless ball bearings on the way to help shake the product up and hope that helps.

I am basically out of CC and PC so this is a chance to try something new and the timing works out as well. I was just blown away by Deep Gloss Sealant I just had to try something else lol. Addictions addictions

Sent from my PH-1 using Autogeekonline mobile app