Thanks: 0
Dislikes: 0
-
Super Member
Re: TORQ 10FX stopped working ? Wth!
Originally Posted by Rsurfer
Not trying to rub salt in your wounds, but a lifetime warranty from a reputable company is hard to beat.
The Torqx polisher has lifetime warranty? Never knew that..
-
Super Member
Re: TORQ 10FX stopped working ? Wth!
Originally Posted by Eldorado2k
The Torqx polisher has lifetime warranty? Never knew that..
I think he’s referencing griots
Sent from my iPhone using Tapatalk
-
Super Member
TORQ 10FX stopped working ? Wth!
Originally Posted by Cleanfreak623
Contacted amazon. They said I’m #### out of luck as it’s past 30 days.
They tell me to contact manufacture and provide a link to chemical guys. They say they won’t help me as it’s an amazon purchase. So I’m just getting bounced from company to company. I’ve been pretty loyal to chemical guys and pretty much only use their products. Well they can suck it.
TORQ tool company seems obscure and I couldn’t even find a phone number. They haven’t responded to email.
Seems like CG as TORQ are same company ?
Either way, last TORQ and last dealings with CG. I’m loyal to a fault sometimes and when I get f^%cked I move on.
Originally Posted by Rsurfer
Not trying to rub salt in your wounds, but a lifetime warranty from a reputable company is hard to beat.
Where did he get Griots polisher from any of that? Idgi.
@OP. Have you even tried to change the brushes yet? If I were you I’d call CG and ask them how to change the brushes. Nevermind anything else or whether it’s past 30 days... Change the brushes 1st and see if that fixes it.
-
Re: TORQ 10FX stopped working ? Wth!
Originally Posted by PaulMys
Sorry to hear this.
Whenever I buy anything, (hand tools, yard equipment, and yes, a polisher) I need a guarantee that it will not let me down within a short period of time.
Craftsman and Snap-On tools have it, Troy-Bilt has it, and Griot's has it. (There are many others, I know...... not starting a brand war).
Researching not only the product and reviews (subjective to say the least), but the companies warranty policy is key in my opinion.
Price shopping (i.e "cheaping out") works in many, many areas in life. Tools and equipment are not one of those areas. JMO
Paul, not saying you're wrong, but only a different perspective. My dad taught me that whenever I bought any tool, it should be the cheapest I could find. The only ones that break will be the ones I use often. When a tool breaks (used it often), THEN go out and buy the absolute best tool that I can afford. His opinion (that I share) was that it doesn't make sense to spend $100.00 for an oil filter wrench if you change your oil twice a year. However, if you're business is oil changes, it is likely money well spent (this was the actual example he used. At the time, I had no clue even what an oil filter wrench was!).
Applied to detailing, I believe this philosophy has worked for me. I started with a VERY cheap polisher. Had I simply wanted to polish my and my wife's cars, I truly believe it would have been sufficient. When I started doing other people's cars, I learned very quickly I needed to improve my tool.
Again, I don't mean to debate, but to offer a different philosophy.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: TORQ 10FX stopped working ? Wth!
Originally Posted by Eldorado2k
Where did he get Griots polisher from any of that? Idgi.
@OP. Have you even tried to change the brushes yet? If I were you I’d call CG and ask them how to change the brushes. Nevermind anything else or whether it’s past 30 days... Change the brushes 1st and see if that fixes it.
I think he was referring to another brand and hinting at that. He wasn’t saying torq has a Lifetime.
I’ll take a look at that. Only reason I didn’t DIY yet is because I was waiting on a resolution from someone but looks like I’m being hanged out to dry
Also, the unit has those weird torx screws with the nipple in the middle so I gotta get one of those bits
-
Super Member
Re: TORQ 10FX stopped working ? Wth!
Originally Posted by Cleanfreak623
Only reason I didn’t DIY yet is because
I was waiting on a resolution from some-
one but looks like I’m being hanged out
to dry
Also, the unit has those weird torx screws
with the nipple in the middle so I gotta get
one of those bits
Good luck with getting a resolution.
And don’t even get me started about
when the nipples are in the middle!
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Re: TORQ 10FX stopped working ? Wth!
Originally Posted by Calendyr
Ya... Torq is very likelly a chineese company... so I would not expect any real support. Mine came with a booklet explaining the warranty... did you have a look at that? There is very likelly a phone number and adress on that. If it's under a year old, it is covered by a warranty for sure, just need to find out how to proceed with it.
If it isn't Rupes(USA/Italy), flex (German), Makita(Japan), Metabo(German)it's chinese oh and bosche(german?)
But their are plenty of quality Chinese counterparts out there..SPTA and Torque arnt one of them..
Autogeek offers some
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: TORQ 10FX stopped working ? Wth!
from Torq Tool Company website:
ONE-YEAR LIMITED WARRANTY
TORQ Tool Company makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser only that TORQ tools shall be free from
defects in materials and workmanship for the period of One-Year from the date of purchase. TORQ Tool Company MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. This warranty will not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, faulty maintenance, damage caused by improper use of chemicals, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. This warranty does not apply to accessory items such as backing plates, pads, or normal wearable motor parts such as brushes, blades, bearings, and TORQ Tool Company shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you.
To take advantage of this warranty, purchaser must return the tool, including the original proof of purchase (sales receipt) to the TORQ Tool Company Service Center with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. The polisher’s serial number must also be intact. If inspection verifies the defect, we will
either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense. If we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of repairing and returning the tool. This warranty does not in any way imply tool’s replacement. The warranty described herein is not transferable to other individuals beyond the original purchaser. Only tools purchased from an authorized TORQ Tool Company distributor are eligible for repair under this warranty. TORQ Tool Company reserves the right to make specifications or design change changes to its products without further notice. TORQ Tool Company does not accept any responsibility for any possible printing mistake.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: TORQ 10FX stopped working ? Wth!
Originally Posted by mk9750
Paul, not saying you're wrong, but only a different perspective. My dad taught me that whenever I bought any tool, it should be the cheapest I could find. The only ones that break will be the ones I use often. When a tool breaks (used it often), THEN go out and buy the absolute best tool that I can afford. His opinion (that I share) was that it doesn't make sense to spend $100.00 for an oil filter wrench if you change your oil twice a year. However, if you're business is oil changes, it is likely money well spent (this was the actual example he used. At the time, I had no clue even what an oil filter wrench was!).
Applied to detailing, I believe this philosophy has worked for me. I started with a VERY cheap polisher. Had I simply wanted to polish my and my wife's cars, I truly believe it would have been sufficient. When I started doing other people's cars, I learned very quickly I needed to improve my tool.
Again, I don't mean to debate, but to offer a different philosophy.
Not to get this discussion too far off topic, but this is how I ended up with cheap DA. I knew it wouldn't get much routine use and that assuption turned out to be true. I started only using it three times every six months, and now that I'm using coatings it gets used three times a year, sometimes less. At the time I couldn't justify shelling out more money for a seldom used tool.
To go along with the philosophy of going cheap, I also know there will be no product/vendor support if it fails. I'm OK with having to buy replacement. If I'm not willing to pay the price of replacement then I need to re-evaluate the tool's importance and go with a more reputable/expensive vendor. It's like a risk assesment each time.
-
Similar Threads
-
By aztec1987 in forum Products Guides
Replies: 2
Last Post: 08-12-2016, 01:08 PM
-
By RangerDetails in forum Products Guides
Replies: 38
Last Post: 04-30-2016, 07:14 PM
-
By Mad Wax in forum Auto Detailing 101
Replies: 3
Last Post: 04-23-2015, 08:26 AM
-
By Tlefe091985 in forum Auto Detailing Tools and Accessories
Replies: 10
Last Post: 12-07-2014, 10:08 PM
-
By aztec1987 in forum Auto Detailing 101
Replies: 1
Last Post: 11-15-2014, 01:27 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks