-
Super Member
Re: Carpro Essence xtreme Gloss
Originally Posted by
RZJZA80
Right, that's what I used for the initial cut, then followed by the FC, but the Essence just didn't do anything at all which surprised me.
That means that FC did it's job.
-
Re: Carpro Essence xtreme Gloss
Originally Posted by
Rsurfer
That means that FC did it's job.
let me correct myself. After the FC I tried Essence to remove the haze left behind, and that's when it did nothing, so I used FC to finish it off instead. Essence didn't even remove the light haze on the piano trim which surprised me.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Carpro Essence xtreme Gloss
I have read a couple of different things regarding gloss enhancer’s cure time.
1. Wait 1 hour then coat
2. Let it cure for 12 hours before coating
Does anyone have experience with curing.
Sent from my iPhone using Tapatalk
-
Super Member
Re: Carpro Essence xtreme Gloss
Originally Posted by
Jeremy5431
I have read a couple of different things regarding gloss enhancer’s cure time.
1. Wait 1 hour then coat
2. Let it cure for 12 hours before coating
Does anyone have experience with curing.
Sent from my iPhone using Tapatalk
The SiO2 in it cures the longer it is allowed to sit after the initial wipe off. If you don't have time then 1 hour is fine. I would recommend a prep wipe either way just to be certain there are no polishing oils remaining on the surface.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
Bookmarks