Any recommendations on applying M37 paint coating V2?

[Calendyr]

How does immediately applying the sealant over the coating accelerate curing? First I've read of this.

It protects the coating during the cure period which is about a week for most coatings. Removes the stress of not exposing the car to water.

[fightnews]

Where are we getting these droppers? I think I ruined my spray pump by not cleaning it out after I put the coating on my rims.

[WaxMaster1]

I have a bottle from when it first came out. Just the other day I went to use it for the first time and it was all goopy and gelled up. I did a search and realized I waited too long. My advice is to coat as many cars as you can, quickly.

Sent from my Pixel XL using Tapatalk

[Bruno Soares]

Yeah, I’d say if you can’t use it within 3 months you’ll waste the rest of the bottle. It cures very fast in the bottle after opened.

[MrOneEyedBoh]

It comes with a sprayer and also a dropper. I recommend using the dropper unless you don't mind overspray everywhere. Let it drip onto the applicator and then cross hatch the area and pretty much the time it will take you to put that down and grab the towels is all you have to wait. Wipe away. It's fairly easy.

Use 2 towels to make sure you get everything removed and no high spots. Nick does not recommend 2 coats so one is all you need.

If you want to accelerate curing, you can apply 10-minute paint sealant over it, otherwise just let it cure until next day. The gloss it adds when freshly applied is very noticeable.

Hey... Its not that I doubt you on this but is there anything with Nick saying this? How do you apply it? Did you do it, if so whats your process? How long after application? I just finished the truck, applying the coating that is, so Im curious as to when I should use the 10min sealant.

[BudgetPlan1]

Where are we getting these droppers? I think I ruined my spray pump by not cleaning it out after I put the coating on my rims.

I just use pipettes for all coatings, much easier, cheap throwaways

Amazon

[ClearVue18]

I just use pipettes for all coatings, much easier, cheap throwaways

Amazon

It doesn't have a dripper on the bottle?

Sent from my SM-N960U using Autogeekonline mobile app

[Bruno Soares]

Hey... Its not that I doubt you on this but is there anything with Nick saying this? How do you apply it? Did you do it, if so whats your process? How long after application? I just finished the truck, applying the coating that is, so Im curious as to when I should use the 10min sealant.

I didn’t do it myself. He’s said it before here and the McKee’s 37 group on FB. People say it’s fine to do it immediately after the coating but personally I’d wait about 2 hours.
Since my bottle of McKee’s gelled up before i got a chance to do a second car, I’ve gone with different coatings that are basically a single application per bottle/kit. Can’t beat the price of McKee’s though.

[BudgetPlan1]

It doesn't have a dripper on the bottle?

Sent from my SM-N960U using Autogeekonline mobile app

Most coatings do but I've come to prefer these...

[MrOneEyedBoh]

I didn’t do it myself. He’s said it before here and the McKee’s 37 group on FB. People say it’s fine to do it immediately after the coating but personally I’d wait about 2 hours.
Since my bottle of McKee’s gelled up before i got a chance to do a second car, I’ve gone with different coatings that are basically a single application per bottle/kit. Can’t beat the price of McKee’s though.

Thanks. I'd assume that if you can top it pretty much immediately , then the coating has cured pretty much 100% right? When I was applying it it still baffles my mind that it's pretty much a wipe on wipe off and it still forms a layer...