MDX honeycomb grille protection suggestions

[ccie]

Any suggestions for a product to protect all what looks like a very time consuming plastic front end?


Thanks

[Klasse Act]

I would coat it with Gyeon WetCoat, might as well do the entire car with it. If you can wait keep an eye out for 303 Touchless Sealant as well!

Sent from my SM-G950U using Tapatalk

[FUNX650]

•Sonus Trim and Motor Kote
•CQuartz DLux


Bob

[Thomkirby]

That almost looks a great place to try the new Blackfire Plex Pro spray, or get a foam brush and start a very long process of treatment.

[Eldorado2k]

Any suggestions for a product to protect all what looks like a very time consuming plastic front end?


Thanks

This works perfect for that.





The can even has a built in meter, to adjust the spray pattern from narrow to wide depending on how much area you need to cover. Leave it to Meguiars to think of these little details that make that nice added touch.

[Setec Astronomy]

I think Eldo has the answer...I might try a WOWA sealant. I also remember a picture of Rasky with a little airbrush spraying a paint coating on a grille like that.

[bfielder32087]

This works perfect for that.





The can even has a built in meter, to adjust the spray pattern from narrow to wide depending on how much area you need to cover. Leave it to Meguiars to think of these little details that make that nice added touch.

I can second this. I use this product for that type of area on my personal car. That being said I never noticed the adjustable spray pattern until now lol.

Sent from my SM-G950U using Autogeekonline mobile app

[BlackMDX]

I used Wolfgang's Exterior Trim Sealant on mine. I just wiped it on then wiped it off. It doesn't take as long as you might think.

Since the grill is hard, smooth, and shiny plastic, the next time I do it, I am going to use Wolfgang's Deep Gloss Paint Sealant, the same thing I use on the body.

[Eldorado2k]

Since the grill is hard, smooth, and shiny plastic, the next time I do it, I am going to use Wolfgang's Deep Gloss Paint Sealant, the same thing I use on the body.

Note: The Meguiars D4510 in the picture isn’t meant to be used on glossy or painted plastics. Only use it on plastics with a matte finish. It’ll leave a nice dark black look with just the right amount of sheen.
I’ve never used it on a shiny black plastic grill [aka piano black plastic] but I think the reason they don’t recommend it is because it’ll probably turn greasy.

2 different kinds of honeycomb grills.

[Setec Astronomy]

Isn't the answer for this...HydrO2?