What did you do today, in regards to detailing?

[NoClue]

Klasse Act, you are a class act. Frequent adventures with your daughter. Memories that will last a life time!

[Klasse Act]

Klasse Act, you are a class act. Frequent adventures with your daughter. Memories that will last a life time!

Thank you and I really hope to be able to get a current gen Miata in a couple years because she'll love sitting up front ALL THE TIME

Sent from my SM-G991U using Tapatalk

[Jayfro]

So after I did that Camry it was time for the ES, it's been a messy, rainy week and it was DUE!

I started with an IGL Blizzard snow foam to loosen and break things down and let dwell and rinsed. Next were the tires and wheels, finished up that Auto-Fanatic foaming wheel cleaner I used earlier, all brushes used again! For the 2BM it was Gyeon Bathe and the ES began to look GLOWING once again

I then grabbed Dream Maker for a drying aid, let those beads sit this time and used my Big Blue drying towel to dry it to a stunning finish The mini Master Blaster dried up the tires/wheels where I applied a coat of Feynlab Black Velvet Tire Coating, let cure for a bit and then topped with Gyeon Tire for a truely great look

Now it's time to soak in the tub and wait for my girlfriend to come over...oh yeah, I have one of those now and her Cruze hatch is next tomorrow, stay "tuned"

Btw I pulled the ES up a bit for better pics and a new angle, surely noone wants to see the same old, same old

Sent from my SM-G991U using Tapatalk

I absolutely love that blue!!


Sent from my iPhone using AGOnline

[ZRX61]

Well that pretty much sums up a couple of brands of detailing clay…

The clay I have bought in the past that actually felt like modeling clay sucked

Sticky doesn’t begin to describe it

I like plasticky feeling clay


Sent from my iPhone using Tapatalk

This is beyond sticky. It's now stuck to the container & impossible to remove. Literally can not get it out of the container. It's going back to Amazon on Monday.

[chilly]

This is beyond sticky. It's now stuck to the container & impossible to remove. Literally can not get it out of the container. It's going back to Amazon on Monday.

Clay is one thing I don’t scrimp on anymore

I’ve seen the $10 clay on Amazon and I bet there is some decent stuff but as you found out it’s a gamble

For over the counter clay I have bought a lot of the Megs and Mothers kits over the years

Not the most aggressive but safe and I feel a good value


Sent from my iPhone using Tapatalk

[Odrapnew]

Sent from my SM-G991U using Tapatalk

I dig that blue. It really pops.

[dgage]

I dig that blue. It really pops.

I don’t think it is the blue that’s actually popping, it’s the 64 different toppers and layers he has on it. But I agree it looks good and he does a great job keeping it detailed.

[dieselfan1]

I don’t think it is the blue that’s actually popping, it’s the 64 different toppers and layers he has on it. But I agree it looks good and he does a great job keeping it detailed.

64?
I lost count at 257

Sent from my SM-G991U using Tapatalk

[PA DETAILER]

Sadly the PA weather will be changing soon to WINTER. Saturday was rain all day, so did inside stuff. This morning the usual wash/detail on the ZR2.

[Big Dave]

I had a $10 credit to use at one of the local auto parts stores, an encouragement to come out and spend now our lockdown is over. So I wandered the aisles, eventually came out with a new glass cleaning mitt, which was 25% off as well, and I needed an air freshener, and that was half price, only $10 out of pocket all done. So I cleaned my windows today inside and out, but I've decided to use the new mitt only on the inside. And yes, the air freshener is from Armor All, I think it's the only product of theirs I still use.

Sent from my F8331 using Tapatalk