What did you do today, in regards to detailing?

[Coatingsarecrack]

Final coat of CQUK3 curing. Next 2coats I’d can coat!




Sent from my iPhone using Tapatalk

[ClearVue18]

Coating touch up

Sent from my SM-N960U using Autogeekonline mobile app

[SWETM]

Did start to clean up the summer wheels. Surprised when I got to the front face of the rims and noticed that the Gyeon Wet Coat was still present. The barrels though is a wreck from the previous owners. Will see if I put the effort in to polishing them up. Depends on if my mini polisher is able to polish them without stalling. The inside of the spokes is like you had covered it with iron LOL. Have a very strong acid gel cleaner that was able to desolve little of it. But would need many times to get it completly off. And the little clearcoat that was on there is proberly not there any more LOL. It's a DD so I can live with it when it's not visual when they are on. Maybe try a polishing cone and see if it's makes any difference. The easiest would be to buy new rims.

Take a go at it tomorrow again.

[IH8SPM]

Does wishing I could do something count? It's been raining for days.

Sent from my SM-N960U using Tapatalk

[bfielder32087]

Rinseless wash with N 914. Wheels were cleaned with Meguiars All Wheel and rinsed with the Worx Hydroshot. Topped my IGL Premier with IGL Enhancer after. Tires dressed with PERL 1•1.

For you folks who like beading pictures there's also a picture before the wash when I did a pre rinse. At that point Premier hadn't been topped with anything. That's a vertical panel FWIW.

Sent from my SM-G950U using Autogeekonline mobile app

[oneheadlite]

Final coat of CQUK3 curing. Next 2coats I’d can coat!

Looking sharp!!!

[SWETM]

Did some testing with polishing with the mini polisher on one of my rim today. And as I thought it was coming black oxidized aluminum on the pad. Only polishing the barrel and with a oem rough texture and the damage on it. It was hard to maintain pad rotation on the mini polisher. Maybe try with a polishing cone or ball for paint and see if it makes a difference and don't take to long of time. I was not getting to much of difference with claying and polishing. One more shoot at it before I give up and seal it in LOL.

[DETAILROOKIE]

Finally got around to correcting the paint of the Genesis and discovered this paint is very hard. It laughed at GG FCC on a white Griots pad, but 3D one on the white pad did wonders to the paint! After 20 mins of testing the pad, polisher, and product mix this paint came to life! I'll be sad when it leaves on June 9th.

Sent from my SM-N960U using Autogeekonline mobile app

[DetailKitty]

I've already washed and dried my car and I'm bored.

I’d like to one day be able to say this statement

[PaulMys]

I’d like to one day be able to say this statement

Tell Roger to get his a$$ over to your house and cut the grass, Monica.