What did you do today, in regards to detailing?

[dgage]

You’re better than me. I’m 0 for 0 because it is 94 out. Need to go out and give my new tires their first thorough cleaning and also need to polish the headlights.

[pro 4x]

Yea, 94 is way too hot! I did not wipe the truck down again! It dried spot free. And the RAIN REPEL in the Duragloss #253 did its job. Tires did not spot or streak.

85 and humid here.

[vaca22]

A neighbor wants his Grand Cherokee done up right. And he wanted to learn as well as get his hands dirty. We washed, iron deconed, and clayed it together. This team effort was WAAAAAAAY better than a solo job, especially in today's heat. Phase 2 will be a light polish (he never drives anywhere and never does a conact wash) followed by CQUK 3.0. He's going to love it.

[Coatingsarecrack]

I busted out the Meg's UWWW to take care of a little grime at the bottom of the rocker panels. I always forget how delicious this stuff smells

On another note, I noticed a bit of the shine on my greasy Endurance Gel had faded away, and I was thinking of just applying another layer of goop over it. Is that ill-advised? I don't feel like scrubbing the old stuff off since that'll take more effort than I'm willing to put in today.

I don’t clean tires everytime I apply a dressing. Long as your not going months between cleanings you should be fine.


Sent from my iPhone using Tapatalk

[Klasse Act]

So the EN hasn't been washed in almost a week, so this morning was the day️

I started out with 4.5 oz of Griot's Garage foaming surface prep and 1 oz of Koch Chemie GsF in my Griot's Garage foam gun. The EN was gritty and has some sap spray on it, I heard it when I put the wipers into "service mode"

While the pre-wash was breakin' it down I addressed the tires and wheels. I coated the tires a week ago w/ Feynlab Black Velvet Tire Coating and haven't touched them. All 4 brushes got used to clean everything very well. While the wheels were wet I sprayed them down liberally with my 4:1 Meg's HCW mix. I then rinsed down the EN and moved to the next step

I decided to add a layer of TWHS Wet Wax to everything and 2 yrs in this product still impresses me to this day. I used 2 plush towels to apply and a larger drying towel for the final buff, soooo easy and satifiying️

Up next was a vac to the interior, wipe the pedals and floormat plate and a wipdown of all interior vinyl/plastic w/TWHS Inside Job. This product leaves the right sheen and scent, awesome! I then applied Gyeon Leather to the seat trim and steering wheel. Finished up w/ 3D Wango Mango interior spray.

Now I can enjoy the 4th of July parade coming past our place in about an hour

Sent from my SM-G991U using Tapatalk

[Klasse Act]

So this was a sap maintence/regain some sanity RW today, Happy 4th of July to everyone!

I used Feynlab RW for this and because it's sunny and hot out right now, 1 panel at a time and dried it immediately. The specs of sap didn't have a chance with Feynlab RW, pre-treating as always and used 350 GSM purple Eagle edgeless mf towels, 5 of them.

I used one of my designated tire/wheel mf towels to clean the tires and wheel faces and spokes, no barrels this time because it's "supposed to" rain this week and like I said earlier, had to regain some sanity from these sap specs.

As you can see the single layer of Feynlab Black Velvet Tire Coating is doing well after 3 washes of different types. I'm not saying it's the best but it's not bad either

Sent from my SM-G991U using Tapatalk

[ZRX61]

Fired up the G8 & removed about 25 years of paint damage from the ZX11

*before*








After polishing, but before wax... this pic just doesn't do it justice.

[ZRX61]

Last week...quick half-assed clean up. Will get the proper clean up when I have all the fairings off..