-
03-11-2019, 05:39 AM
#1041
Super Member
Re: What did you do today, in regards to detailing?
Originally Posted by minerigger
That would be correct. The griots foam surface wash and honeydew mixture didn’t do much. It got the surface wet and a very minimal amount of dirt and salt released. I had to 2bm 2 times. Guess I should drug out the pressure washer but it’s already a pita due to having to wash in the paved alley so I don’t have a pond in my driveway.
Some poor engineering went on when my house got built. If I’m in the alley it is ever so slightly slopes to the center and the drains downhill. But with snow melting and slush everywhere I was trying to hustle so the neighbors would quit splashing slop all over the car.
I’m waiting for the foam surface prep. I’d get a gallon but I already have 3 gallons worth of soap to use up. Might have to add apc or degreaser if it gets like that again.
Sent from my iPhone using Tapatalk
I'm going to say and I'm not breaking any new ground here, maybe the LSP is broke down
Sent from my SM-G950U using Tapatalk
2022 Elantra N Cyber Gray
Some say..."He likes Swedish fish because they're made with caranuba wax"
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
03-11-2019, 06:42 AM
#1042
Super Member
Re: What did you do today, in regards to detailing?
YouTube
Sent from my iPhone using AGOnline
-
03-11-2019, 07:44 AM
#1043
Super Member
Re: What did you do today, in regards to detailing?
My God ppl y'all be writing textbooks and textbooks when responding lol. J/K
Sent from my SM-N960U using Autogeekonline mobile app
-
03-11-2019, 01:47 PM
#1044
Super Member
Re: What did you do today, in regards to detailing?
Originally Posted by Klasse Act
I'm going to say and I'm not breaking any new ground here, maybe the LSP is broke down
Sent from my SM-G950U using Tapatalk
Oh most definitely it is gone. McKees 10 min paint sealant lasted like 6 weeks. I washed it up and put hydro blue on it. So mad.
The wifes in the other hand was not degraded but the crud was extremely heavy. All is better now though
Sent from my iPhone using Tapatalk
-
03-11-2019, 06:32 PM
#1045
Super Member
Re: What did you do today, in regards to detailing?
Originally Posted by minerigger
Washed my work truck and wifes Armada. Used IK foam9 with leftover honeydew and added griots foam surface wash. Used foam surface wash in the bucket as well. Foamed, rinsed, not much difference, then 2bm both. Cleaned wheels and tires. Tires not so much but enough to look better. Hit both of em with hydro blue and used up my 16oz bottle. I like it better than wetcoat. Dried both using pfms. Going to do engine bay on wifes before it goes in for a service. Hopefully vacuum mine out tomorrow and wipe down inside.
Sent from my iPhone using Tapatalk
I bought both at the same time and I have to agree with you hydro over wet coat...both still good though
Sent from my LG-Q710AL using Autogeekonline mobile app
-
03-11-2019, 06:53 PM
#1046
Super Member
Re: What did you do today, in regards to detailing?
Originally Posted by Eldorado2k
How long does Q2 Tire last on its own?
Not long i.m.o, I was very underwhelmed if you get the itch and wanna try it let me know I'll send you a sample
Sent from my LG-Q710AL using Autogeekonline mobile app
-
03-11-2019, 07:30 PM
#1047
Super Member
-
Post Thanks / Like - 0 Thanks, 4 Likes, 0 Dislikes
-
03-11-2019, 07:33 PM
#1048
Super Member
Re: What did you do today, in regards to detailing?
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
03-11-2019, 08:02 PM
#1049
What did you do today, in regards to detailing?
Not what did I do today, but what I’m planning on doing tomorrow.
I’m planning on using H-D Speed on my new truck to remove the spider scratches from the dealership.
The weather is supposed to be between 36-40 degrees when I plan on doing it.
Will the colder temps have an ill effect on the product or outcome??
Should I wait until the weather is in the 50’s or warmer?
Any and all responses are greatly appreciated.
Sent from my iPhone using Tapatalk
-
03-11-2019, 08:09 PM
#1050
Super Member
Re: What did you do today, in regards to detailing?
Originally Posted by heloguy
Not what did I do today, but what I’m planning on doing tomorrow.
I’m planning on using H-D Speed in my new truck to remove the spider scratches from the dealership.
The weather is supposed to be between 36-40 degrees when I plan on doing it.
Will the colder temps have an ill effect on the product or outcome??
Any and all responses are greatly appreciated.
Sent from my iPhone using Tapatalk
I'd try a test spot first.
If on a clean surface, I'm sure the Speed would work fine in the lower temps (though not ideal).
And I would also think the removal would be compromised somewhat in the lower temps. But this is only me speculating. (I love Speed, and have used it often. But always above 50 degrees)
It is no coincidence that man's best friend cannot talk.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
Similar Threads
-
By VISITOR in forum Off-Topic
Replies: 3510
Last Post: 04-17-2024, 02:13 PM
-
By Driwash in forum Show N' Shine
Replies: 41
Last Post: 10-13-2021, 12:29 AM
-
By SON1C in forum Auto Detailing 101
Replies: 15395
Last Post: 10-05-2018, 10:57 AM
-
By Cruzscarwash in forum Off-Topic
Replies: 3
Last Post: 03-28-2017, 07:06 PM
-
By OCDetails in forum Show N' Shine
Replies: 3
Last Post: 03-25-2006, 09:20 PM
Members who have read this thread: 114
- Lance Mark,
- Innovator,
- Mmab,
- Dr Oldz,
- Nappers,
- Agent6er,
- RPPM,
- 11Silverado,
- jamesss35,
- TNMIKE46,
- PeteT19640,
- Tbonem3,
- vaced,
- mikeinauburn,
- Dyerlog,
- KirkH,
- georgia boy,
- 70fastback,
- The Guz,
- fastfreddy,
- Prange,
- bcarte3,
- PouncingPanzer,
- jstollar,
- LSNAutoDetailing,
- XSR,
- barryscott,
- Vegas1,
- UncleDavy,
- waddell64,
- jedi kid,
- Big Dave,
- craigdt,
- Bosko,
- vobro,
- FocusSTguy,
- Rsurfer,
- Eidos71,
- tgame80,
- BudgetPlan1,
- PaulMys,
- aannatshlzea6696,
- 02whitetundra,
- MidnightNarwhal,
- Avadesh Nathan,
- davidwjohnson,
- mc2hill,
- ev780,
- DUBL0WS6,
- vaca22,
- Urmil,
- mengelhardt,
- Forty,
- miatadriver,
- rackeu,
- BTW574,
- vlamimc,
- chefwong,
- Ace22,
- 98CayenneTA,
- Sfs4567,
- Jeffrey16,
- Yancy,
- YMMV,
- aaustinfranesoz7344,
- larr12,
- dlc95,
- Maklingler,
- MCarter88,
- Dirty Harry,
- Desertnate,
- chadkintz,
- Torsion Tool,
- boosteddub69,
- DG3.7,
- Tasmania,
- Jplouch,
- Jimbosan72,
- JerryL,
- Icarus,
- Wknd Dtlr,
- Dan K,
- TTQ B4U,
- CleanIT,
- Azure,
- VISITOR,
- oneheadlite,
- Nav45,
- Kneel,
- John U,
- hansen97,
- Optimus Grime,
- dbeng,
- PA DETAILER,
- Epilogts,
- Odrapnew,
- Gridlink,
- MisterSnoop,
- AMarkham40,
- chilly,
- SNP209,
- DanaDetailingPros,
- msharpe785,
- cb804,
- bapatickmjnra7168,
- DFB,
- bill walsh,
- Setec Astronomy,
- Karl_in_Chicago,
- rmtaylor51,
- kappy,
- brianshaeffer,
- Texchappy,
- Silly Rabbit
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks