Menzerna One Step Polish

[Farmallluvr]

I'd like to try it and maybe I'll order some if I can get my employer to foot the bill.

What I like is cut,polish and wax in one application and at 50 bucks for 32 oz it's cheaper than the quart of 3m I usually cut with although I have recently dropped that for M100 Megs.

could you use it after wetsanding and buffing with a 3m product and then use that to finish it out?.

[Vanquish Auto]

I'd like to try it and maybe I'll order some if I can get my employer to foot the bill.

What I like is cut,polish and wax in one application and at 50 bucks for 32 oz it's cheaper than the quart of 3m I usually cut with although I have recently dropped that for M100 Megs.

could you use it after wetsanding and buffing with a 3m product and then use that to finish it out?.

I can send you some if you want to try it out.

[ChristyZ]

I can send you some if you want to try it out.

Can I get in on that deal? Would love to try!

Sent from my SM-G965U using Autogeekonline mobile app

[Vanquish Auto]

Sure PM me your info and I’ll send you some out.

[SWETM]

Sonax Red DA Hard Cutting pad and HC400 on a 21mm longthrow polisher. And 4 passes per section on a SS paint that was a little oxidized LOL.



Try the HC400 on a fine polishing pad and move up in aggressiveness of pad if needed. Or switch to SF3500 if you think it's to aggressive. And have also in mind that you use very little of product when polishing with Menzerna polishes.