Griots Poly looking good.

**PaulMys** · 11-19-2018, 06:56 PM

Awesome beading Kirby!!

**timmy6262** · 11-19-2018, 07:16 PM

My budget is fairly low I do detailing as a part part time job (1 or 2 a month) but I have the Blackfire sealant and Blackfire wax but I use Griots Poly wax almost every time and everyone has loved the look and how long it lasts. Easy on and off, looks great it can't be beat.

Sent from my PH-1 using Autogeekonline mobile app

**Mike lambert** · 11-19-2018, 07:48 PM

After having the pleasure of working with Rod, Jeff and Doug from Griot’s on a project, we are now exclusively using Griot’s in our shop. Nothing we use in our shop has a different name on it except the Rupes I brid. I’ll give them time and that’ll change I’m sure!

**WRAPT C5Z06** · 11-19-2018, 08:07 PM

Originally Posted by Mike lambert

Nothing we use in our shop has a different name on it except the Rupes I brid. I’ll give them time and that’ll change I’m sure!

Well, the 3” Griots DA sucks, sooooo

Sent from my iPhone using Autogeekonline mobile app

**VISITOR** · 11-19-2018, 08:24 PM

Originally Posted by WRAPT C5Z06

Well, the 3” Griots DA sucks, sooooo

Sent from my iPhone using Autogeekonline mobile app

with the 2" conversion kit it works well IMO...

**PaulMys** · 11-19-2018, 08:33 PM

Originally Posted by VISITOR

with the 2" conversion kit it works well IMO...

And if it ever smokes, you won't get the cold shoulder from their CS.

Just sayin'.

**Thomkirby** · 11-19-2018, 10:32 PM

Agree with PaulMys and I have used the kit shown. Saved the day on some tight spots. I am sure that the Rupes and Flex units for small pads might do better but again at almost 4x priced it better!

**Klasse Act** · 11-19-2018, 10:51 PM

I have both the Foaming Surface Wash as well as Poly Gloss and the term "game changer" is thrown around like "special edition" is but IMO it applies here! When my car is just dusty from days of driving all I have to do is foam it with my IK Foam 9 with 2 ounces of GG FSW topped with 1.3 gallons of distilled, let it work and rinse and dry, done! If i feel like it, after that, i can foam it again with Poly Gloss using my mini IK foamer, BAM! I know some are all about smell and these products DO NOT DISAPPOINT!

Thank you Griot's for taking your time and NAILING it

Sent from my SM-G950U using Tapatalk

**VISITOR** · 11-20-2018, 03:46 AM

this is question is for anyone who has used this ^
can it be used in a bucket wash and if so, how many ounces per gallon or per instructions state?

**WRAPT C5Z06** · 11-20-2018, 06:04 AM

Originally Posted by VISITOR

with the 2" conversion kit it works well IMO...

It’s decent with the 2”. The 5mm throw is just too small to do any efficient correction. 8mm would have been much better.

Sent from my iPhone using Autogeekonline mobile app