-
Re: SIO2 Coating Maintenance
I gave up on Cure as my wife's black car kept streaking at 50 / 50. I switched to the new BF SIO2 sealant and love it. You cannot streak it. When I run out of the 32 oz bottle, I'll but a gallon.
If I didn't want a SIO2 product, I'd use M 37 Extender Spray wax or Meguires D 156.
-
Super Member
Re: SIO2 Coating Maintenance
Originally Posted by
bfenne
Thank you Guz!
I ordered a liter before I saw your post. More than enough for me. Thanks for your solid advice again.
Brian
Nice. Enjoy it. Mixing in Cure as mentioned is a nice touch.
I personally have never had an issue with Cure streaking at full strength or 50/50.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: SIO2 Coating Maintenance
Thanks for all the replies guys!
I am not opposed to blending in Cure to the ECH20. Curious what is the benefit? Also what Cure dilution ratio do you put into say 1:20 Ech20 mix?
So I am new to the SIO2 coating world and why I went with coating light products like Gyeon Can Coat and McKee's 10 min paint sealant. Wanted something more forgiving to work with. Cant speak to durability yet as they are fresh with in last week or two. I did chemical and mechanical decon, paint restoration and prepped surface before application.
Both were great to work with. I both used on "every" exterior surface on different vehicles. I will say I probably used more product than needed due to inexperience with coatings and I found hard to follow product during application on light colored vehicles under good lighting. I worked one panel / area at a time using a micro fiber applicator pad. I split big panels up. Applied and buffed before moving to next panel to prevent high spots. I applied 2 coats for each vehicle waiting a few hours between second coats. After second coats I waited a few hours again before applying Gyeon Cure (FULL STRENGTH) on Can Coat and McKee's Trademark Extender Wax on 10 min paint sealant. I sprayed on MF applicator pad and applied to surface and buffed going panel by panel.
My thoughts on both products...
Can Coat and 10 min Paint Sealant
1. Both fairly simple to use
2. Seemed to require more buffing than I expected. Primarily paint and glass. Black plastics smooth and porus was a breeze.
3. I am not an expert but gloss/shine look incredible
4. I am now converted to SIO2 style products
Cure / Trademark Extender Wax
1. Very simple to use
2. I am not an expert but gloss/shine and slickness look and feel incredible
3. I am now converted to SIO2 style products
What Ive learned..
1. Can Coat and 10 Min Paint Sealant-Trust the product and process even if you cant see it. Then second coat should get any areas you may have missed. May help with the buffing also.
2. Cure / Extender Wax- Have fresh applicator / rags ready. When rag is saturated streaking potential high. Switch to new applicator / rag. Use saturated rags / applicator on glass or wheels and buff.
3. Probably will stay with SIO2 based light products so I have more flexibility.
4. I would reccomend both brands products and will use again if longevity is reasonably better that a paste wax. Time will tell.
Just though I would share. Thanks to all who have helped me.
-
Post Thanks / Like - 2 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: SIO2 Coating Maintenance
-
Re: SIO2 Coating Maintenance
Don’t forget about McKee’s 37 Hydro Blue.
Sent from my iPad using Tapatalk Pro
-
Re: SIO2 Coating Maintenance
Just a quick follow up. I received ECH2O and mixed 1:20 for a quick detailer using distilled water.
I applied it to all/every surface on a vehicle protected with Mckee's 10 minute paint sealant that was topped with Mckee's Trademark Extender Wax. ECH2O QD Application is a breeze and super easy to work with. I sprayed on all surfaces one at a time, wiped and followed up with light buff. I observed no streaking at this ratio or other concerns. This is a real winner and product is multipurpose.
Next up will be a vehicle coated with Gyeon Can Coat and Topped with Gyeon Cure.
Big thanks to "Guz" on sharing his knowledge.
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Super Member
Re: SIO2 Coating Maintenance
Originally Posted by
bfenne
Just a quick follow up. I received ECH2O and mixed 1:20 for a quick detailer using distilled water.
I applied it to all/every surface on a vehicle protected with Mckee's 10 minute paint sealant that was topped with Mckee's Trademark Extender Wax. ECH2O QD Application is a breeze and super easy to work with. I sprayed on all surfaces one at a time, wiped and followed up with light buff. I observed no streaking at this ratio or other concerns. This is a real winner and product is multipurpose.
Next up will be a vehicle coated with Gyeon Can Coat and Topped with Gyeon Cure.
Big thanks to "Guz" on sharing his knowledge.
Glad to hear you are enjoying it.
-
Super Member
Re: SIO2 Coating Maintenance
I am currently maintaining the 10 min paint sealant with McKess rinse free wash and wax. Diluted down for a drying aid. 2oz to 30oz of water in a spray bottle. Amazing results so far!
-
Re: SIO2 Coating Maintenance
Just wanted to add the ECHO2 diluted 1:20 works pretty darn good as a interior glass cleaner as well. Spray, wipe, buff and streak free.
I assume this product has a UV inhibitor so could it be used a vinyl / plastic interior dressing?
-
Junior Member
Re: SIO2 Coating Maintenance
Originally Posted by
bfenne
Just a quick follow up. I received ECH2O and mixed 1:20 for a quick detailer using distilled water.
I applied it to all/every surface on a vehicle protected with Mckee's 10 minute paint sealant that was topped with Mckee's Trademark Extender Wax. ECH2O QD Application is a breeze and super easy to work with. I sprayed on all surfaces one at a time, wiped and followed up with light buff. I observed no streaking at this ratio or other concerns. This is a real winner and product is multipurpose.
Next up will be a vehicle coated with Gyeon Can Coat and Topped with Gyeon Cure.
Big thanks to "Guz" on sharing his knowledge.
Have you had a chance to tests this yet. I am looking to to try out cancoat soon then use a mix of Cure, distilled water and some ech2o as drying aid to maintain.
Bookmarks