Re: Has Anyone Used Aquawax on top of McKee's Paint Coating as a Drying Aid?
Thank you! I know people are mixing Reload and Echo2 to do that. Not sure what would be the less expensive but I will look at both when I run out of Reload (should be soon, I have about 100 Ml left).
Re: Has Anyone Used Aquawax on top of McKee's Paint Coating as a Drying Aid?
My M4 has WGDGS, topped with with McKee’s fast waxe and detailed with Duragloss 931 rinseless wash with Aquawax (3oz/16 oz, actually used 2oz) . So not Aquawax on top but rinseless 931 as a Detailer (will try aquawax as a drying aid once temp. Get above freezing) the rinseless as a Detailer really kicks it up another notch
Re: Has Anyone Used Aquawax on top of McKee's Paint Coating as a Drying Aid?
I would think most would say no because it’s polymer or wax based spray sealant gloss enhancer Ahhh that is what I think is a coating main issue ....is that they all last so long. So if your a person that likes to always be detailing u are going to have lots of free time.
I put aquawax on a coating and saw a drop is water beading but still had great seems like it only stayed on for a couple day before coating was back as top exposed
Re: Has Anyone Used Aquawax on top of McKee's Paint Coating as a Drying Aid?
Quote:
Originally Posted by
Calendyr
Nick, does McKee have the equivalent of Car Pro Reload yet? A sillica sealant to apply on top of coatings? I am running low on Reload and I am considering my options for a replacement. I have seen a comparison video with GTechnic C2V3 and Gyeon Skin and I am not sure what I will get yet. Always been happy with Reload, but it's very expensive.
As for Aquawax, if you have the product already, I would use it until I run out. Then switch to a more appropriate sillica based product to replace it.
In case this hadn’t been answered in the last 11 months, Mckees 10 Min Paint Sealant would be their Reload
competitor
Re: Has Anyone Used Aquawax on top of McKee's Paint Coating as a Drying Aid?
Just an FYI from my experience...
All 3 of my cars have McKee's 37 coating, and I do use Aquawax as my drying aid. Works pretty well in my "unprofessional" opinion.
Eric