-
Newbie Member
Best 5” pads
I have a Meguiars MT 300 and a Porter Cable DA and have been using Chemical Guy’s pads. Any recommendations for new ones. I mostly just use a All in One or Polish and Wax
Sent from my iPhone using Autogeekonline mobile app
-
Super Member
Re: Best 5” pads
I like Buff and Shine, Lake Country, Griot's Boss pads.
2013 Genesis Coupe 3.8 Track Edition
2015 Hyundai Sonata Limited, 2016 Pearl White Nissan Altima SR
2019 Nissan Rogue SL
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Best 5” pads
The Meguiar's thin foam pads work great on both tools.
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes
-
Re: Best 5” pads
The lc hybrid pads are the only true 5" pads I have but I dont think they sell them anymore
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Newbie Member
Re: Best 5” pads
Anyone have any experience with lc force?
-
Super Member
Re: Best 5” pads
Originally Posted by
MJL1966
Anyone have any experience with lc force?
I really like the black force finishing pads. The orange is a bit too firm for me. I probably wouldn't get the force pads unless you're using a forced rotation polisher
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Re: Best 5” pads
5" orange LC force are the only pads I use with my 3401. good stuff
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
Re: Best 5” pads
I use 5.5" pads on a 5" backing plate if that is what you're looking for. Lake Country Thin Pro and Flat pads have served me well.
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes
-
Regular Member
Re: Best 5” pads
Just got my GG6 and I ordered all griots garage pads
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Best 5” pads
Buff and Shine "Grip Pads":
Red - Sealant/Wax/Fine finishing
Black - Cleaner Wax
Blue - General Polishing
Green - General Cutting / "One Step" Polishing
Orange Microfiber - Extra Heavy Cutting
Lake Country Hydrotech:
Crimson - Sealant and wax application / Fine finishing / cleaner wax
Tangerine - General Polishing - Excellent cut and finish / "One step" polishing
Cyan - General Cutting
Microfiber Cutting - Extra heavy cutting
Those are the two sets I most often use. I tend to use the B&S more, but really love the LC Hydros. I do not recommend the Hydrotech for the beginner, because they have a faster wear rate. The Hydrotech are closed cell foam, which keeps the liquids/abrasives on the work surface. This helps for maximum cycling of diminishing abrasive polishes/compounds. The cut to finish ratio is another notable feature of these pads. The Tangering cuts and finishes more than the blue Buff and Shine. The finish it leaves is absolutely stunning! Out of all of them, that pad impresses me the most.
I tend to pair the Buff and Shine group with Meguiar's, and the Lake Country group with Menzerna/Duragloss.
An honorable mention goes to the Meguiar's Thin Foam Discs. I regularly use their Microfiber pads, but more recently have integrated the foams into the arsenal. They remind me of my Buff and Shine selection, but "dig deeper" per pad. The burgundy cutting is a real heavy cutter, and their yellow polishing is a tick more aggressive than the Buff and Shine Blue. Their durability is also very impressive.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Bookmarks