-
Regular Member
Foam cannon soap ratio...
Haven't used my foam cannon for a few years, got a new pressure washer and have ordered the new adaptor. I have some left over melon shampoo, but forgot exactly how to mix. Any input? BTW, gonna try some Car Pro quartz on.my daily driver to see if I like it
-
Super Member
Re: Foam cannon soap ratio...
-
Super Member
Re: Foam cannon soap ratio...
I don't use the snow foams but for something like hyper wash I fill to the second line of my foam cannon
-
Super Member
Re: Foam cannon soap ratio...
2-3 ounces of soap and the rest of the bottle with warm water...
-
Super Member
Re: Foam cannon soap ratio...
With Gyeon Foam, 1:10 outta a PFM22 cannon and SunJoe SPX3001 works well, sometimes up to 1:15. Not the drier shaving cream foam, but a more aqueous foam that clings just long enough to meet recommended dwell time. Beneficial? I dunno but it's entertaining and easily done in short period of time.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Regular Member
Re: Foam cannon soap ratio...
With hyperwash I use 2 oz to get a good foam without wasting too much product.
-
Re: Foam cannon soap ratio...
Originally Posted by
BudgetPlan1
With Gyeon Foam, 1:10 outta a PFM22 cannon and SunJoe SPX3001 works well, sometimes up to 1:15. Not the drier shaving cream foam, but a more aqueous foam that clings just long enough to meet recommended dwell time. Beneficial? I dunno but it's entertaining and easily done in short period of time.
what is the recommended dwell time?
-
Super Member
Re: Foam cannon soap ratio...
Originally Posted by
BudgetPlan1
With Gyeon Foam, 1:10 outta a PFM22 cannon and SunJoe SPX3001 works well, sometimes up to 1:15. Not the drier shaving cream foam, but a more aqueous foam that clings just long enough to meet recommended dwell time. Beneficial? I dunno but it's entertaining and easily done in short period of time.
What nozzle do you run on that setup...thats on my list
Sent from my SM-G930V using Tapatalk
-
Super Member
Re: Foam cannon soap ratio...
Originally Posted by
kevin_1981
what is the recommended dwell time?
Generally around 4-5 minutes max; sometimes a little less as foam sliding off coated surfaces determines it's time is up. Somewhat controllable by mixture knob on PF22, usually a touch under max foam.
Originally Posted by
minerigger
What nozzle do you run on that setup...thats on my list
Sent from my SM-G930V using Tapatalk
3.0 (1.76gpm @ 2100psi)
-
Super Member
Re: Foam cannon soap ratio...
My next question is do you use the gun with a long wand or just the gun itself
Sent from my SM-G930V using Tapatalk
Bookmarks