Dislikes: 0
-
-
Super Member
Re: New to using a buffer.
It's only slightly better than nothing. Good for applying wax if that. There are a ton of threads on polishing and on Youtube.
-
Super Member
Re: New to using a buffer.
You can also check out Mike Phillip's book on detailing here on Auto Geek.
-
Super Member
Re: New to using a buffer.
Here's an article by Mike Phillips regarding the style of buffer you have: http://www.autogeekonline.net/forum/...-spreader.html But this is one case I don't agree with Mike as IMO they would make it more difficult to spread wax or sealant than doing it by hand.
If you really want to take your paint to the next level you need to get a PC, Griots or Megs buffer designed to remove swirls. Even the Harbor Frieght 6" Orbital buffer will do a good job if you want to keep the cost down (about $50).
-
Re: New to using a buffer.
Thanks! ^ I have some reading and some research to do!
Sent from my iPhone using Tapatalk
-
Re: New to using a buffer.
I'm going to get laughed at...ask me if I care.
I say it's better than nothing for sure, and it's certainly better than using your hands. Sure, they're not ideal polishers for today considering there are much better polishers made and offered today.
I have an old two handed version of a Craftsmen orbital 10". If it was fitted with a Velcro backing plate so that different pads could be put on it would be a beast on large panels even for compounding. It would be great for AIO's, or cleaner waxes. Pretty tough to use it in smaller areas, but great on large panels.
Some here feel they're boat anchors (they are still being made by manufacturers today), and while I understand their reasoning for stating such when compared with more modern polishers, sometimes you have to use what you have. I understand that.
The only problem with posting about it on a forum like this is that most either can't or won't help you because they use more modern tools or they don't sell pads/bonnets that will fit what you have, though AG may offer at least bonnets to fit that machine. If you search online you can still find pads and bonnets to fit that machine.
Some here say they're aren't powerful. I disagree 100%...at least with regard to that old machine I have because all 290lbs. of me has tried to stop it and I can't...rotating or oscillating. It has tons of power. If only the smaller versions of that polisher had as much power.
If I had pads to fit my machine it would be a joy to use on large vans and RV's. Then again, both arms would get tired compared to using my G110v2 and my rotary. Modern polishers (PC7424, Griots, G110v2, etc.,) have so many more advantages though.
Try Meguiar's Ultimate Polish, then Ultimate Wax.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
dlc95 thanked for this post
-
Super Member
Re: New to using a buffer.
Aren't the orbital polishers/"wax spreaders" a shorter stroke than other DAs? I'm not even sure it would be called stroke with these since they just kind of vibrate around. I think the lack of "stroke" is what makes them not effective for paint correction, not necessarily a lack of power.
-
Re: New to using a buffer.
Originally Posted by MIsnowman
Aren't the orbital polishers/"wax spreaders" a shorter stroke than other DAs? I'm not even sure it would be called stroke with these since they just kind of vibrate around. I think the lack of "stroke" is what makes them not effective for paint correction, not necessarily a lack of power.
Not mine. Think Dyna-brade dual action rotary attachment type of stroke...which I have. No...my Craftsmen has a huge throw.
-
Super Member
Re: New to using a buffer.
Originally Posted by Hoytman
Not mine. Think Dyna-brade dual action rotary attachment type of stroke...which I have. No...my Craftsmen has a huge throw.
Will it reach the trash can?
-
Re: New to using a buffer.
Originally Posted by Hoytman
I'm going to get laughed at...ask me if I care.
I say it's better than nothing for sure, and it's certainly better than using your hands. Sure, they're not ideal polishers for today considering there are much better polishers made and offered today.
I have an old two handed version of a Craftsmen orbital 10". If it was fitted with a Velcro backing plate so that different pads could be put on it would be a beast on large panels even for compounding. It would be great for AIO's, or cleaner waxes. Pretty tough to use it in smaller areas, but great on large panels.
Some here feel they're boat anchors (they are still being made by manufacturers today), and while I understand their reasoning for stating such when compared with more modern polishers, sometimes you have to use what you have. I understand that.
The only problem with posting about it on a forum like this is that most either can't or won't help you because they use more modern tools or they don't sell pads/bonnets that will fit what you have, though AG may offer at least bonnets to fit that machine. If you search online you can still find pads and bonnets to fit that machine.
Some here say they're aren't powerful. I disagree 100%...at least with regard to that old machine I have because all 290lbs. of me has tried to stop it and I can't...rotating or oscillating. It has tons of power. If only the smaller versions of that polisher had as much power.
If I had pads to fit my machine it would be a joy to use on large vans and RV's. Then again, both arms would get tired compared to using my G110v2 and my rotary. Modern polishers (PC7424, Griots, G110v2, etc.,) have so many more advantages though.
Try Meguiar's Ultimate Polish, then Ultimate Wax.
I have/had a 6" Sears "wax spreader"...played with it, removed all the original plate 'stuff'. Put some OTC Velcro on the plate. Slapped a LC 6-1/2" White pad on it.
Yea! It did work! Not the best, but the price was right AND fun to try.
As I think back, I believe I first saw this idea here, When? Not a clue.
Bill
In dog beers, I've only had one.
Similar Threads
-
By zacetzel in forum Wet-Sanding, Cutting & Buffing
Replies: 5
Last Post: 04-15-2014, 11:09 AM
-
By Mach1USMC in forum Ask your detailing questions!
Replies: 28
Last Post: 04-14-2013, 11:42 PM
-
By excalibur in forum Ask your detailing questions!
Replies: 14
Last Post: 06-26-2012, 09:06 AM
-
By ScottB in forum Auto Detailing 101
Replies: 11
Last Post: 06-24-2009, 06:49 AM
-
By ynkjeter in forum Auto Detailing Tools and Accessories
Replies: 5
Last Post: 03-17-2006, 06:45 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks