sonax perfect finish

[luckydawg]

Any one have any issues with this?

[The Guz]

Only issue I had is that it tended to dust a little bit. Other than that it worked well.

Are you having issues with it?

[luckydawg]

Only issue I had is that it tended to dust a little bit. Other than that it worked well.

Are you having issues with it?

No- but I have not used it yet
This product is a tad on the expensive side compared to most others- and I am considering purchasing the small 8 oz tube to give it a try, so I thought I would ask prior to spending the jack

[The Guz]

Wait for the sales this week and save a bit on it.

Ex 04-06 is a good polish from Sonax as well.

[WillSports3]

To avoid the dusting issue, you really don't need a lot of product. Two drops to start off with and one drop after that. Spray a little distilled water. I find with sonax cut and finish as well as perfect finish, they dust very obviously when I don't spray a little n914 waterless wash mixture on the pad.

[luckydawg]

i never understand on not priming a pad
with a unused pad and only a few small drops isn't most of the pad working dry? abrading the surface?

[WillSports3]

I prime the product with a spray of n914 instead of wasting levelling fluid.

[luckydawg]

I prime the product with a spray of n914 instead of wasting levelling fluid.

Thanks
you think just spraying with demin or distilled water would work??
I don't have any n914

[lane5515]

If you're using a DA go with 04-06. Rotary go with Perfect Finish.

I've never had 04-06 dust on me, it's a great polish.

[WillSports3]

I would suggest distilled water on the pad anytime you polish but that's me.