Opti-Coat Pro Applied - Have Questions/Need Help

[Maxima777]

Hey all!


I had my 2016 Black Nissan Maxima applied with Opti-Coat Pro about 2 weeks ago. Everything looked great at first as I picked it up on on a cloudy day. The shine was great, but then the next day in the sun I noticed there were plenty of swirls and maring. Having paid $1,000 for this I was pretty bummed out because I had really high expectations. I got in contact with the shop owner (really great guy) and asked about this and was told to let it cure because it might come out a bit. I waited about 5 days and then I spoke to him in person. He explained that it looked like to him when they buffed the Opti-Coat Pro to level it out, it caught some of the microfiber residue and created some swirls. I'm not an expert by ANY means but to me it looks like the original paint correction wasn't done propery? In the sun there's a lot of swirling in my opinion, but I leave it up to you guys to tell me if I'm crazy or not. Another thing I noticed is that when I did a quick detail, I noticed scratching when I put a tiny bit of pressure on the microfiber towel. I know the goal is to put no pressure at all, but it makes me wonder why it's scratching?


A week from today I have an appointment with the company. I was told that by doing a light buff they should be able to remove the swirling. Any Opti-Coat that is removed will be re-applied.


Please include any comments, opinions, or concerns.


Thanks for the help!


Hood


Front Door


Back Door


Roof


Being Picky?
Opt

[cleanmycorolla]

Did you notice the swirls before or after your quick detail. Also what kind of towel are you using?

Btw. That's not normal. I don't know one pro who'd hand a car back like that. Is this person a legit opticoat pro installer?

[C5Longhorn]

I would be upset also. If you paid $1000, the finish should look flaw less under the coating.

Sent from my Nexus 6P using Tapatalk

[Maxima777]

Did you notice the swirls before or after your quick detail. Also what kind of towel are you using?

Btw. That's not normal. I don't know one pro who'd hand a car back like that. Is this person a legit opticoat pro installer?

I use wizards quick detail, 70/30 420 GSM edgeless microfiber towels
But, the pictures are from the day after the Opti-Coat in the sun

[custmsprty]

That's not proper prep work prior to applying the coating, that's for sure.

Be sure to get swirl finder light so when you pick it up after they "fix it" you can inspect the paint.

This is a great example of a professional coating installation pre and post coating. Zach and his team are one of the best.

The End of an Era - 2015 Chevy Suburban - Paint Correction & Coating - My Last Detail at Attention to Detailing

[Ernie Mccracken]

I wonder if they did any polishing at all before applying the coating. My hack sense is tingling.

[Maxima777]

This is what I was really hoping for... or like even 90% of this.
The cars about a year old, does that matter at all? I mean obviously it had some swirls which is
why I got it done... but they weren't terrible by any means

I wish I could post the videos going across in the sun

That's not proper prep work prior to applying the coating, that's for sure.

Be sure to get swirl finder light so when you pick it up after they "fix it" you can inspect the paint.

This is a great example of a professional coating installation pre and post coating. Zach and his team are one of the best.

The End of an Era - 2015 Chevy Suburban - Paint Correction & Coating - My Last Detail at Attention to Detailing

[custmsprty]

IMHO for $1,000 your Maxima paint should be flawless.

Check this 370Z out, and I did this for $250.00, no coating but swirl free and applied LSP after correction step:

2014 Nissan 370 Z Griots G21 HD Adapt 7 HD Poxy

[mwoolfso]

For $1000 I am sure he is a very nice guy to talk to... but you want results! Poor job and an even poorer explanation. I am not an "OptiPro", but I have applied it and not once have I ever considered buffing OptiCoat to level it out. The dang product needs xx days to cure so buffing at post-application is just ALL WRONG to me. Get some money back, and tell him to fix it and do it right the first time for the next customer. Also, send the pics to Optimum and explain the situation to them, maybe they can do something about this guys certification.

[2wookies]

Also, send the pics to Optimum and explain the situation to them, maybe they can do something about this guys certification.

Maybe give the shop owner a shot at making it right? Everybody's had a bad day, if he's able to fix it correctly without trying to deny poor work no biggie. BUT if he tries to fight it then send it up the food chain!