Just recieved my mtm hydro but then got a bit confused

[Bill1234]

Ive been wanting a power washer for a while and a family member got one for me Then went on another site and bought an mtm cannon/lance (they call it lance on the box) I now recieved the mtm lance today !!! I have a quick connect fitting on the power washer and on the lance I have two adapters. Once is a quick connect fitting and one is a screw on threaded piece. I was wondering how I would attach the quick connect piece as there is oddly no place for me to do so

[chefwong]

You screw it right onto the lance body---assuming you are using standard 1/4 QD on your gun nozzle.....the latter threaded is for the guns using M22 if I recall

[Bill1234]

Attached is the part I mean. I have seen others with the part off where I can attach the silver quick connect fitting

[VISITOR]

you need the 1/4 quick connect...

[Bill1234]

That piece was included but there is a karcher bayonet on and I need to get it off to put on the quick connect

[VISITOR]

you unscrew that piece and screw in the above quick connect (with some pluming tape to help reduce leaks) and you should be in business...

[VISITOR]

you unscrew that piece and screw in the above quick connect (with some pluming tape to help reduce leaks) and you should be in business...

[Bill1234]

Yea thats what I figured out. Just hard to get off. Any ideas how to?

[VISITOR]

try using a crescent wrench, it looks like there is a threaded area below the fitting...

[chefwong]

LOL Visitor. Bill, I presume you are not trying to do this by hand ?
You need a hand tool....both to get fitting off and on....so the thing doesn't leak or go flying