Re: 2013 Camaro - Rupes Production Detailing - by Mike Phillips
Originally Posted by kosmetikwerks
Great work Mike as always!
How do you find the wipe off of WG Uber AIO when left on during the duration of polish cycle?
Harder than I like. You should wipe off panel at a time, I was getting "pictures".
I know Nick has been working hard with our chemists on improving the formula's ease-of-use. I'll have to double check with Nick, but the "3.0" formula should be available by January at the latest.
Re: 2013 Camaro - Rupes Production Detailing - by Mike Phillips
Originally Posted by dsg03gt
Mike did you use one pad for the entire car?
Good question!
From memory I think two pads but I'd have to look through my pictures to be sure.
The owner wouldn't know a swirl if it bit her so the primary goal after decontamination was to simply clean and clear up the paint while leaving it sealed and protected.
I actually saw this Camaro yesterday as it belongs to my daughter-in-law and in the shade it looked great!
Re: 2013 Camaro - Rupes Production Detailing - by Mike Phillips
Originally Posted by rcoops77
Hi Mike
Thanks for the awesome write up.
I noticed that you only mechanically decontaminated
Any reason why you didn't deionize (chemically decontaminate)?
My guess would be that he was focusing on production style detailing. While doing a iron-x treatment would be ideal its also a added cost. In this instance the clay or nanoskin is fine.
Re: 2013 Camaro - Rupes Production Detailing - by Mike Phillips
I should be more specific. Looks like it was a foaming, then 1 mitt and no buckets. Ar u spraying the mitt with the hose after each panel? And using the same mitt for top and bottom of car?
Bookmarks