Using Wolfgang Tornador Air Foamer

[gearheadrd]

Hi Mike,

I just received a Wolfgang Tornador Air Foamer HP for Christmas. I'm just wondering what is the best method to wash the car using this thing. Should I be presoak the car with water first before I spray the foam, or should I spray the foam on the car dry?

After spraying the foam, what should be the next procedure(s) to finish up the wash?

Thanks

[James K]

Never used one myself, but from what I just read on AG it says:

"To use the Tornador “Snow Gun” Foam Gun for car washing, start by rinsing down the vehicle with a water hose. Mix the desired shampoo with water as directed on the product’s label. Attach the nozzle to the jar tightly and attach the gun to the air compressor. Turn the air compressor i and coat the vehicle with foam. Turn off the air compressor and agitate vehicle with a sponge or mitt. Rinse with your water hose!

To use the Wolfgang Tornador Air Foamer HP Foam Gun for interior carpet and fabric cleaning, dilute a concentrated interior cleaner per the label directions. Spray the carpet and seats with foam and use a brush to agitate the area. Then towel dry and vacuum."


I would be careful about the air your air compressor is providing though. Make sure you have a good oil separator inline with this, and I would run a filter system like you would when you paint a car.

[photoadjuster]

If you are in a area of hard water, be sure to use distilled water or even RO water in the tornador. If you, will they will last your lifetime.