-
Re: Ceramic light coatings
I have a 2.5 side carport.
2 sides completely enclosed & other side covered half way down. Would this be ok for both Quartz Lite & Cancoat?
One car is in the carport & other outside.
Sounds like some of it goes to waste due to shelf life.
-
Super Member
Re: Ceramic light coatings
Originally Posted by
PeteT19640
I have a 2.5 side carport.
2 sides completely enclosed & other side covered half way down. Would this be ok for both Quartz Lite & Cancoat?
One car is in the carport & other outside.
Sounds like some of it goes to waste due to shelf life.
For sure yes with CanCoat and probably true for CQlte. The main thing is to keep them dry. Preferably for 24 hours.
Sent from my iPhone using Tapatalk
-
Super Member
Re: Ceramic light coatings
Originally Posted by
Paul A.
My problem with Can Coat is i can't use the whole bottle before the 3 supplied sprayers go t**s up. Tried everything from storing in water after use to sucking acetone through them.
I do simply find another sprayer and keep plugging through the bottle.
Don't get me wrong...I LOVE Can Coat!
I didn’t use the sprayer. I know the say it’s faster with MF but always worried about over spray and can get a panel covered pretty fast with a 3x5 autofiber applicator.
Just used disposable eye droppers.
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Re: Ceramic light coatings
How many drops per panel?
The new Evo has a new adifferent sprayer?
I uses MF applicator with the WG Spray Ceramic Coating and was good once loaded/primed.
-
Super Member
Re: Ceramic light coatings
Originally Posted by
PeteT19640
How many drops per panel?
The new Evo has a new adifferent sprayer?
I uses MF applicator with the WG Spray Ceramic Coating and was good once loaded/primed.
I’d drip a solid line down the applicator.
Sent from my iPhone using Tapatalk
-
Super Member
Re: Ceramic light coatings
Follow the recommended application for cancoat. Here is the video. The concern is the coatings seeing moisture which includes dew. The sprayer works best if rinsed right after using hot water. They include three sprayers.
-
Re: Ceramic light coatings
2 1/2 sides enclosed.
Shouldn't take that much to rig up some plastic or tarps to covey the rest enough to keep it dry.
-
Re: Ceramic light coatings
Originally Posted by
The Guz
Follow the recommended application for cancoat. Here is the video. The concern is the coatings seeing moisture which includes dew. The sprayer works best if rinsed right after using hot water. They include three sprayers.
Thanks for that.
Unfortunately I can't purchase the Evo Cancoat. They have the old one.
-
Re: Ceramic light coatings
Originally Posted by
ducksfan
2 1/2 sides enclosed.
Shouldn't take that much to rig up some plastic or tarps to covey the rest enough to keep it dry.
Thanks for the idea.
-
Re: Ceramic light coatings
I can get the Quartz Lite cost about $120.
Only thing that is holding me back is the shelf life.
I have x 2 cars I could coat even if I put 2 coats on that's still only in total x4 cars.
How many cars does one bottle coat.
Bookmarks