-
Coating and the edges of panels
Just applied my first coating, CQuartz Lite. The biggest problem I’m having is creating high spots at the edge, especially lower, of panels. Is there any tips or a good technique to utilize to prevent this?
-
Super Member
Re: Coating and the edges of panels
Originally Posted by
Texchappy
Just applied my first coating, CQuartz Lite. The biggest problem I’m having is creating high spots at the edge, especially lower, of panels. Is there any tips or a good technique to utilize to prevent this?
Get down on your hands and knees with good lighting.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Re: Coating and the edges of panels
Originally Posted by
Rsurfer
Get down on your hands and knees with good lighting.
I might need a crane to get me up if I do that lol. I can stand for short bits to do the upper but I’m chair bound most of the time.
-
Super Member
Re: Coating and the edges of panels
Originally Posted by
Texchappy
I might need a crane to get me up if I do that lol. I can stand for short bits to do the upper but I’m chair bound most of the time.
Sorry to hear that..I apologize, was trying to be funny, I'm sorry that it didn't come off that way.
-
Re: Coating and the edges of panels
No issues. You weren’t to know and I wasn’t offended in the least.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Coating and the edges of panels
Originally Posted by
Texchappy
I might need a crane to get me up if I do that lol. I can stand for short bits to do the upper but I’m chair bound most of the time.
Could you use something like this to help you access the lower panels/parts of the car ?
Attention Required! | Cloudflare
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Coating and the edges of panels
I have one of those from when I was still able to turn a wrench when a need be. I was thinking about that but not sure I could really extract myself from it these days - at least without the aforementioned crane.
-
Super Member
Re: Coating and the edges of panels
Maybe check out lift creepers ?
Lift Creepers | Ohio AgrAbility
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Coating and the edges of panels
Just use more towels. After initial removal use another side for the edges as well. Then do same with second buff towel.
Not changing towel out enough i think was my problem. When towel gets saturated it pushes coating around more than remove it.
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Coating and the edges of panels
Wipe larger than your application area. When it comes to edges try working from the edge to center for the first towel. Then wipe as I first mentioned.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
Bookmarks