Polishing and waxing clear corvette roof?

[mikeci]

Hi Gang,
I have a 2008 corvette with a plexiglass roof. I have used plexus, sealants and waxes over the last 12 years. I am in the process of doing a complete detailing on the car and would like to know what can I use to polish then seal the roof.
Thanks for the help,
Mike

[FUNX650]

I have a 2008 corvette with a plexiglass roof.
I have used plexus, sealants and waxes over
the last 12 years.

I am in the process of doing a complete detailing
on the car and would like to know what can I use
to polish then seal the roof.

•My 2007’s Lexan top had an OEM “hard coat”
applied. As such: I only used glass cleaners on it.
-BTW: It still looked like new when I sold the vehicle
in 2015.





************************************************

OK...Back to your top:

•You’ll find it quite the daunting task to polish
yours if it, too, had the OEM “hard coat” applied.

-With the success you’ve had so far (12 years),
I’ll suggest that you continue using the same
Waxing/sealing products.


Bob

[Mike Phillips]

Hi Gang,

I have a 2008 corvette with a plexiglass roof. I have used plexus, sealants and waxes over the last 12 years.

I am in the process of doing a complete detailing on the car and would like to know what can I use to polish then seal the roof.

Thanks for the help,
Mike

My guess is it's LEXAN - not Plexiglass.

The world stopped using Plexiglass a long time ago. Too bad in my opinion as Plexiglass is SOFT and easy to work on. This Corvette back window is REAL Plexiglass.


Polishing Plexiglas to be as clear as glass using Pinnacle Advanced Finishing Polish







And the first sentence in the first paragraph from my article above,

First a couple of things....


1: Plexiglas is NOT like most modern plastics. It's very SOFT.

[Mike Phillips]

I have a 2008 corvette with a LEXAN roof.

would like to know what can I use to polish then seal the roof.

I typed this into Skynet and found the below. Bot have some great info from Bob aka FUNX650


Corvette Lexan Top Cleaning

2014 Corvette Stingray Removable Roof Panel "DROPPED" and Damaged

[Mike Phillips]

My 2 cents....


I've NEVER seen Lexan polished to look clear and perfect like glass.

I've tried. By this I mean, I've tried to machine polish Lexan to remove swirls and scratches.

It's been a few years but I couldn't do it with the abrasive technology available back then. I could make it look "better" but nowhere near good and far from perfect.

Might be possible today but always do a,

TEST SPOT


What do you have for,

Tools
Pads
Products

[57Rambler]

FYI, window cleaners and any other products which contain ammonia will damage polycarbonate Lexan.

[TTQ B4U]

I have and use and LOVE Rolite Medium and fine Polishes which are specifically made for Plastic & Acrylic Surfaces Including Marine Strataglass & Eisenglass. I mainly use them on headlights and tail lights. Well worth looking into.

[Mike Phillips]

Did you mean rv roof cleaning?

I don't see anyone talking about RV roofs?


Looking at your other 2 posts.

https://www.autogeekonline.net/forum...ml#post1696266

Gorilla platform ladders dirt cheap! $23.88



Will keep an eye on...