autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Super Member Don M's Avatar
    Join Date
    Jan 2010
    Location
    NE Ohio
    Posts
    2,247
    Post Thanks / Like

    Difficulties with Meguiar's D151 PRC application/removal by hand

    https://www.autogeekonline.net/forum...ford-edge.html

    I used the Meg's D151 on my in law's Ford yesterday and when I tried to do the areas inaccessible to the buffer, I tried using a MF covered applicator and the stuff was a nightmare. I used a dry applicator and the polish didn't want to spread or work, it gummed up on the pad and the paint and it seemed to take a ton of polish just to get a small area - the exact opposite of using it with the PC.

    When I first started using it on the PC last night, I gave the pad a spritz or two of Ult Quik Detailer to prime it, should I have done the same thing with the hand applicator pad?

    Any suggestions?
    Don M
    2017 Camaro 2LT
    376 RWHP, 6-Speed manual

  2. #2
    Super Member Evan.J's Avatar
    Join Date
    Sep 2012
    Location
    Pittsburgh, PA
    Posts
    4,915
    Post Thanks / Like

    Re: Difficulties with Meguiar's D151 PRC application/removal by hand

    Don if it's gumming up on you try using less product or prime the pad with a spirtz like you have on the pad.
    Official Detailing Team Member of Air Force One
    Flex 3401 / Flex PE8 / Rupes 21 / G110v2 / GG6" / Rupes 75E / GG3"
    Click and Like my Facebook Page

  3. #3
    Super Member Don M's Avatar
    Join Date
    Jan 2010
    Location
    NE Ohio
    Posts
    2,247
    Post Thanks / Like

    Re: Difficulties with Meguiar's D151 PRC application/removal by hand

    Quote Originally Posted by Evan.J View Post
    Don if it's gumming up on you try using less product or prime the pad with a spirtz like you have on the pad.
    Thanks, I'll give that at try on the next detail.
    Don M
    2017 Camaro 2LT
    376 RWHP, 6-Speed manual

  4. #4
    Mike Phillips
    Guest

    Re: Difficulties with Meguiar's D151 PRC application/removal by hand

    When using any one-step cleaner/wax by hand or machine, assuming the paint is neglected - if so then you use the product heavy or wet.

    If you watched the episode of Competition Ready where we worked on the million dollar plus Duesenbergs on the mode owned by Augie Duesenberg we used a one-step cleaner/wax from SONAX and I explained how when using one-step cleaner/waxes you use them heavy or wet.

    Heavy or wet means use an ample amount of product because you want plenty of the below ingredients working for you,

    Lubrication
    Chemical cleaners
    Abrasives
    Protection



    Quote Originally Posted by Don M

    I used a dry applicator and the polish didn't want to spread or work, it gummed up on the pad and the paint and it seemed to take a ton of polish just to get a small area - the exact opposite of using it with the PC

    Using it with a dry pad means the pad tried to absorb the product instead of spreading out and working for you.




  5. #5
    Mike Phillips
    Guest

    Re: Difficulties with Meguiar's D151 PRC application/removal by hand

    If you get the Velocity channel, watch for a rerun of episode 1 from season 2,


    This one,


    Competition Ready - Season 2 - Episode 1 - Indianapolis Motor Speedway Museum - Two Duesenbergs


    Screenshots for the cleaner/wax segment












  6. #6
    Mike Phillips
    Guest

    Re: Difficulties with Meguiar's D151 PRC application/removal by hand


  7. #7
    Super Member Don M's Avatar
    Join Date
    Jan 2010
    Location
    NE Ohio
    Posts
    2,247
    Post Thanks / Like

    Re: Difficulties with Meguiar's D151 PRC application/removal by hand

    Thanks Mike, I'll have to check out the shows and the link.
    Don M
    2017 Camaro 2LT
    376 RWHP, 6-Speed manual

Similar Threads

  1. Meguiar's D151 + KSG =
    By Don M in forum Show N' Shine
    Replies: 4
    Last Post: 08-05-2018, 05:27 PM
  2. Meguiar’s D151 vs Meguiar’s D166
    By Maxreed241 in forum Auto Detailing 101
    Replies: 11
    Last Post: 01-28-2018, 10:59 PM
  3. Meguiar's D151-How Come...?
    By PappyD in forum Customer Comments
    Replies: 12
    Last Post: 03-20-2011, 09:21 PM
  4. Meguiar's D151 under the sun??
    By cobraa in forum Auto Detailing 101
    Replies: 5
    Last Post: 07-01-2010, 03:41 PM
  5. Any Need For Meguiar's D151?
    By The Critic in forum Auto Detailing 101
    Replies: 14
    Last Post: 04-04-2010, 06:59 AM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» April 2024

S M T W T F S
31 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 1234