Roadkill remnants on plastic fender liner

[briarpatch]

As the title suggests, I have (what I believe to be) roadkill remnants on the plastic fender liners on my Tundra. Nothing I've used so far (Megs APC at 4:1, Greased Lightning) has worked...even when coupled with a fairly stiff brush and a lot of elbow grease. When I dress the fender wells, they 'disappear', but are back by the time the truck gets washed again. Any suggestions? I've thought of trying steam...just haven't gotten there yet.

[AGOatemywallet]

$5 trim tool from Harbor Freight

Pop the liners off

Have at it

You may get better results by spraying with APC and then laying a damp MF towel on it to increase the dwell time before it evaporates.

Plastic razor blades work well too.

When you are done and 100% clean...coat them with CarPro DLUX. They will stay cleaner and clean up with a damp MF.

If you can't to DLUX...Spray wax them once a month. I prefer Meguiar's Synthetic Express Wax (D156).

[briarpatch]

thank you....will start with the plastic razor blade and see if that helps