Polishing enamel paint

[Jrdriver]

Just picked up a boat today it's a 74 and it's been stored in a garage it's whole life and bought from the original owner so it's in good shape and taken care of but the enamel paint does have some oxidation what would you guys recommend to polish it with?

[GSKR]

Pics would help that's some old paint.

[Jrdriver]

Pics would help that's some old paint.

I'll have to grab a good picture in the morning but it's white with a gold stripe I'm not looking for a mirror finish or anything just trying to clean it up some then I'll top with a couple coats of collinite 845

[GSKR]

Get some angle shots if you can.If it's oxidized 845 will be death to remove.what are your machine skills,rotary or pc?

[Jrdriver]

Get some angle shots if you can.If it's oxidized 845 will be death to remove.what are your machine skills,rotary or pc?

I don't have a machine but I can borrow one it would be a rotary I haven't used one in a few years but I know my way around one alright

[GSKR]

On paint that fragile and old I would be hesitant using a rotary and depleting any material left.This you may have to do by hand,how big is the boat.mike Philips invented a process using a #7 hand glaze with terry cloths and feeding the paint before polishing.#7 glaze you can get from autozone or advanced apply a lot on a terry cloth and rub in vigorously.once done then you can pretty much see what products you will need to restore the paint in a safe manner.

[Mike@ShineStruck]

3d adapt on Boss yellow pad shined up my 75 hornet nicely
Could always try m7 glaze with polisher first

[Mike@ShineStruck]

Curious how the McKee jeweling wax would do

[GSKR]

Curious how the McKee jeweling wax would doany wax over oxidation will just conceal the fade.one or two washes your back to square one.

[Mike@ShineStruck]

The jeweling wax has abraisives in it..

[GSKR]

The jeweling wax has abraisives in it..jeweling wax deosnt have enough bite to clean up oxidation properly.