FrankS
03-07-2016, 04:36 PM
This beautiful brand new truck belongs to forum member Joshwaa (Josh).
Josh lives just a few miles from me so some of the detail was done at his work place and some at my place due to his work schedule.
The same day that Josh picked up his truck from the dealer we began with the detail, which was on a Saturday afternoon.
Here are some before shots. Josh insisted that no detail work was done at the dealer - smart decision.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_001_zpsercuhc8g.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_050_zpsnrxnw81u.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_002_zpscikgvhey.jpg
When I arrived, Josh was already in the process of removing some of the badges.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_051_zpsmutc0mup.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_052_zpsxvwrtko4.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_053_zpso15z1crd.jpg
As usual, wheels and tires first - helps to put the tires on wood planks in order to clean and dress the bottom of the tires.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_030_zpszzixtcyn.jpg
Megs APC+ diluted at 1:4 along with a Wheel Woolie was used on the wheel wells.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_023_zpslj1gaues.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_026_zpsxh1aoa8g.jpg
We tried a couple of tire cleaners to remove the markings on the tires but it wouldn't come out, so we used VM&P Naphtha paint thinner and a small nylon brush since we had it on hand. That seemed to work well after some scrubbing.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_003_zpswmdmq6nc.jpg
The tires were then cleaned with McKee's 37 tire cleaner.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_032_zpsvpzt7hzc.jpg
Tires were scrubbed until white foam was visible.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_024_zps6ws76tll.jpg
Mckee's 37 wheel cleaner was used for the wheels.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_006_zpsgnw1vlvc.jpg
I like the foaming action of the wheel cleaner, the foam gets thicker as you scrub.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_007_zpskzxer0k8.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_055_zpswm9rnwvr.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_028_zpsxfqpuovt.jpg
Two coats of McKee's 37 tire coating was applied to the tires. (The tire coating was applied at the end of the detail but thought I would show it here).
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_027_zpsqb8euzca.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_029_zpsfkoc1axs.jpg
Time to clean the paint - Iron-X Snow Foam was used as a pre-wash.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_057_zpsgbaqtslt.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_058_zps9iyz9pnq.jpg
Josh rinsing off the Snow Foam.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_010_zpsmrosxzen.jpg
McKee's 37 Extreme Foam was used as the lube for the claying process to remove bonded contaminants from the paint.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_059_zps6ulgmbln.jpg
We ran out of daylight but there was a nice LED flood light helping us out.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_011_zpsxjbxy8te.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_012_zps3l45oatk.jpg
Josh using a Nanoskin Fine Grade Towel.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_013_zpsi4yz2kxp.jpg
Waffle weave towels and the Master Blaster were used for drying.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_060_zpsjkqe8ywn.jpg
The truck was then taken to my house on Monday for the polishing process. A waterless wash was performed beforehand using McKee's waterless wash and Griots PFM towel.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_015_zpssixd7taf.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_016_zpsvblgrzuu.jpg
Truck was then taped up.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_061_zpsukvjtjla.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_017_zpsaxeaviug.jpg
The paint was in good condition, just a few minor swirls and scratches.
Flex 3401+White Hybrids pads+Mckee's 37 Polish was used mostly. Mckee's Compound was used on a few areas.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_062_zpsjycaxvhd.jpg
Polishing away.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_063_zpsmqkl8fb5.jpg
Getting the lower sections.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_066_zps65dw9ooh.jpg
The glass had some kind of film.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_020_zpsz7oxurg5.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_021_zpspboweva6.jpg
Starting with the least aggressive method, the combination of the Flex 3401+White Hybrid pad+McKee's polish cleaned it up.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_065_zpshvmrl5bb.jpg
The exterior glass was coated with Carpro Flyby Forte.
After the polishing step the paint was wiped down with Gtechniq Panel Wipe to remove any polish residue.
The Paint was coated with Gtechniq Crystal Serum Light (CSL) and topped with EXO.
Here are some final beauty shots.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_035_zpsmdc4yeow.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_036_zpsmt5pjuqt.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_037_zpsfu7xz2bq.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_038_zpsp7j0ek9c.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_039_zpsnzxbnfxk.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_040_zpsljwyxdtj.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_041_zpssapoaear.jpg
Reflection of the American Flag.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_042_zpsjaegn8at.jpg
Big thanks to Josh for his help on this project.
Josh lives just a few miles from me so some of the detail was done at his work place and some at my place due to his work schedule.
The same day that Josh picked up his truck from the dealer we began with the detail, which was on a Saturday afternoon.
Here are some before shots. Josh insisted that no detail work was done at the dealer - smart decision.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_001_zpsercuhc8g.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_050_zpsnrxnw81u.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_002_zpscikgvhey.jpg
When I arrived, Josh was already in the process of removing some of the badges.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_051_zpsmutc0mup.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_052_zpsxvwrtko4.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_053_zpso15z1crd.jpg
As usual, wheels and tires first - helps to put the tires on wood planks in order to clean and dress the bottom of the tires.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_030_zpszzixtcyn.jpg
Megs APC+ diluted at 1:4 along with a Wheel Woolie was used on the wheel wells.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_023_zpslj1gaues.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_026_zpsxh1aoa8g.jpg
We tried a couple of tire cleaners to remove the markings on the tires but it wouldn't come out, so we used VM&P Naphtha paint thinner and a small nylon brush since we had it on hand. That seemed to work well after some scrubbing.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_003_zpswmdmq6nc.jpg
The tires were then cleaned with McKee's 37 tire cleaner.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_032_zpsvpzt7hzc.jpg
Tires were scrubbed until white foam was visible.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_024_zps6ws76tll.jpg
Mckee's 37 wheel cleaner was used for the wheels.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_006_zpsgnw1vlvc.jpg
I like the foaming action of the wheel cleaner, the foam gets thicker as you scrub.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_007_zpskzxer0k8.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_055_zpswm9rnwvr.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_028_zpsxfqpuovt.jpg
Two coats of McKee's 37 tire coating was applied to the tires. (The tire coating was applied at the end of the detail but thought I would show it here).
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_027_zpsqb8euzca.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_029_zpsfkoc1axs.jpg
Time to clean the paint - Iron-X Snow Foam was used as a pre-wash.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_057_zpsgbaqtslt.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_058_zps9iyz9pnq.jpg
Josh rinsing off the Snow Foam.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_010_zpsmrosxzen.jpg
McKee's 37 Extreme Foam was used as the lube for the claying process to remove bonded contaminants from the paint.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_059_zps6ulgmbln.jpg
We ran out of daylight but there was a nice LED flood light helping us out.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_011_zpsxjbxy8te.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_012_zps3l45oatk.jpg
Josh using a Nanoskin Fine Grade Towel.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_013_zpsi4yz2kxp.jpg
Waffle weave towels and the Master Blaster were used for drying.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_060_zpsjkqe8ywn.jpg
The truck was then taken to my house on Monday for the polishing process. A waterless wash was performed beforehand using McKee's waterless wash and Griots PFM towel.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_015_zpssixd7taf.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_016_zpsvblgrzuu.jpg
Truck was then taped up.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_061_zpsukvjtjla.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_017_zpsaxeaviug.jpg
The paint was in good condition, just a few minor swirls and scratches.
Flex 3401+White Hybrids pads+Mckee's 37 Polish was used mostly. Mckee's Compound was used on a few areas.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_062_zpsjycaxvhd.jpg
Polishing away.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_063_zpsmqkl8fb5.jpg
Getting the lower sections.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_066_zps65dw9ooh.jpg
The glass had some kind of film.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_020_zpsz7oxurg5.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_021_zpspboweva6.jpg
Starting with the least aggressive method, the combination of the Flex 3401+White Hybrid pad+McKee's polish cleaned it up.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_065_zpshvmrl5bb.jpg
The exterior glass was coated with Carpro Flyby Forte.
After the polishing step the paint was wiped down with Gtechniq Panel Wipe to remove any polish residue.
The Paint was coated with Gtechniq Crystal Serum Light (CSL) and topped with EXO.
Here are some final beauty shots.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_035_zpsmdc4yeow.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_036_zpsmt5pjuqt.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_037_zpsfu7xz2bq.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_038_zpsp7j0ek9c.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_039_zpsnzxbnfxk.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_040_zpsljwyxdtj.jpg
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_041_zpssapoaear.jpg
Reflection of the American Flag.
http://i24.photobucket.com/albums/c36/fosaladrigas/2016%20Ram%201500/800_042_zpsjaegn8at.jpg
Big thanks to Josh for his help on this project.