View Full Version : Electric Pressure washer
Redfireshaker06
02-22-2016, 08:26 AM
I'm looking at getting an electric pressure washer to use for my CR spotless and a foam cannon. I know the CR spotless needs a low flow of water, but the foam cannon needs the pressure. Which out there would work perfect for both? I already have a strong gas one, I just feel I would use the electric more for the mustang since its easier to use. Thanks in advance everyone.
11Silverado
02-22-2016, 08:34 AM
What's your price range?
Redfireshaker06
02-22-2016, 08:39 AM
under $200 since its not for a business. Just my personal use
Mike@DedicatedPerfection
02-22-2016, 08:51 AM
I would pick up a Karcher unit.
Everything on these machines are interchangeable. They have a wide range of products that will work with one another. Hoses, wands, accessories, etc.
11Silverado
02-22-2016, 08:59 AM
I tried the 2,000 psi green works sold at Lowes and it was returned after a couple of uses. It was leaking water at the connections and I was extremely disappointed. I ended up purchasing a Kranzle and they are very expensive, but I absolutely love mine.
Firehouse Mike
02-22-2016, 09:18 AM
I just picked up one of these..AR AR390SS Blue Clean Supreme 2000 PSI Electric Cold-Water Pressure Washer (http://www.pressurewashersdirect.com/AR-AR390SS-Pressure-Washer/p15092.html)
I had a Cambell-Hausfeld for a couple years, unloader valve blew up on it a few days ago, but it was a good unit for $120 at the time
Mike
Smitty4x4
02-22-2016, 10:21 AM
I have a large gas powered unit but picked up a Ryobi 2000 psi unit frome Home Depot. I have been happy with it. With the convenience and much lower noise I have not even thought of using the gas unit.
asianisafish
02-22-2016, 12:18 PM
I got some one off ebay, it was karcher
Redfireshaker06
02-22-2016, 05:09 PM
Does anybody have experience with foam cannons and electric pw?
215Detailing
02-22-2016, 06:53 PM
https://www.youtube.com/watch?v=evFTeRxtEEo hope this helps
Cabrio
02-22-2016, 09:10 PM
I have a large gas powered unit but picked up a Ryobi 2000 psi unit frome Home Depot. I have been happy with it. With the convenience and much lower noise I have not even thought of using the gas unit.
I also have a Ryobi 2000 psi from Home Depot. Very happy with it.
jcaustin87
02-22-2016, 09:43 PM
Does anybody have experience with foam cannons and electric pw?
i have the 119.00 ryobi hand carry unit with an MTM foam cannon thats rated up to 2600 PSI. Does just fine.
11Silverado
02-22-2016, 11:32 PM
Does anybody have experience with foam cannons and electric pw?
I use an electric pressure washer and foam cannon. I purchased the Kranzle 1122TST. It foams nicely and part of that depends on the soap you use. I will say this pressure washer is really not good for much other than cleaning your car, but I use it often enough to justify the price.
Priyaka
02-23-2016, 02:56 AM
I tried the 2,000 psi green works sold at Lowes and it was returned after a couple of uses. It was leaking water at the connections and I was extremely disappointed. I ended up purchasing a Kranzle and they are very expensive, but I absolutely love mine.
Which model Kranzle do you have? How long have you had it? I take it you have not had any problems with it. I have a cheaper PW that I am not happy with.
infofrog
02-23-2016, 09:06 AM
Kranzle 900 dollars is a lot money but looks nice . What about 200 to 300 dollar PW . I'm looking for one myself .. I looking at the Karcher and Sun Joe SPX3001 . Not sure yet . I want to add foam washer . I don't want 5 foot wand .
Rick
Rick
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.