BADLY oxidized boat no match for G21

[Firehouse Mike]

Had a call the other day to an exterior on a Rinker 270 boat. Owner said it had " a little " oxidation. No worries. Well, what he meant was that there was a little blue coloring showing though the oxidation! My old WEN rotary died last week and I haven't picked up a new rotary yet. He was kinda in a hurry to get it done so figured I'd put my Griot's G21 to the ultimate test! It performed great as expected. I used Griot's Microfiber pads and a few Meguiars DMC pads (went though 5 or so of each even with cleaning after every section ). Pads did a good job chewing though the oxidation with minimal heat build up. The Megs pads did seem to get warmer that the Griot's, maybe due to no hole in the center like the Griot's pads have. I used Griot's new Fast Correcting Cream. Worked great on the gel-coat with easy wipe off and no dusting. I will say, as with most polishes, not to let it sit too long or it will get really tacky and hard to remove. It finished off nicely, but did not have a real long working time. I would have liked a few more passes out of it. I have not used it on automotive paint yet, so it may just be due to the gel coat absorbing some of it. Either way, for not having a rotary to use on this beast, which should have been the only option, the G21 and MF pads along with the BOSS Correcting Cream did a great job!!! I could only upload these pics, the others all failed for some reason, but they are all on my FB page for your viewing pleasure!

Mike


41234

41235

41236

Completed shot of boat here...

https://scontent.fsnc1-1.fna.fbcdn.net/hphotos-xlp1/v/t1.0-9/12705636_783478825086556_6728621382978312677_n.jpg ?oh=a2826c4131b0644d0a9fc4e541a3fc06&oe=576F4C48

[NoleFan]

Looks great! How did you get the oxidation out of the inside/in between the letters?

[Kamakaz1961]

Awesome work!

[Cabrio]

That's a great job. The gel coats on boats are porous and can be extremely prone to oxidation if not properly cared for. How were your arms and back feeling after tackling that godzilla?

[hdez]

Looks great! How did you get the oxidation out of the inside/in between the letters?

Wondering that too!

[RaskyR1]

Looks great! Nice work!


I'm sure the oxidation had a lot to do with the short working time. On your typical automotive paint you should be able to work it for a very long time if you wanted to. :props:

[Firehouse Mike]

Looks great! How did you get the oxidation out of the inside/in between the letters?

I tool an old drill adapter and cut it WAY down to 1/2" and cut down some old MF pads to fit on it. I've been doing this for a couple years now, seems to work OK, but need to pick up some real ones from Kevin Brown

[dlc95]

Any pics of the old Wen rotary?

[Mike@DedicatedPerfection]

Wow! Nice work Mike!

[RTexasF]

I can hear the owner now....."Wow, I forgot that the hull was blue!"
Really nice work, I'm sore just looking at it.

[Justin at Final Inspection]

Awesome work!!!