Mike Phillips
02-19-2016, 02:13 PM
What's in the box? Griot's BOSS G10 Pneumatic Polisher (http://www.autogeekonline.net/forum/new-car-care-products/98927-whats-box-griots-boss-g10-pneumatic-polisher.html)
What's in the box?
Let's take a look!
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_001.jpg
Included in the box are,
Griot's BOSS G10 Pneumatic Polisher
24mm wrench
Owner's manual
Pictures but not included
5" Griot's Vented Orbital Backing Plate
6" Griot's Vented Orbital Backing Plate
The G10 pneumatic polisher comes equipped with either a 5 or 6 inch vented backing plate (your choice).
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_002.jpg
The G10 pneumatic polisher has the shape of a traditional pneumatic palm sander except she's a little smaller than average sized palm sanders making it lighter in weight and very easy to hold and grip.
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_003.jpg
The Paddle Throttle Control lever like most palm sanders is located at the top of the tool. As you grip the tool the palm of you hand depresses the lever bringing the polisher up to the speed set by the throttle.
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_004.jpg
The owner's manual is well written, comprehensive, detailed and complete. It walks you through how to assemble the tool for use plus recommendations for best performance when correcting, polishing and waxing paint.
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_005.jpg
Quick-Connect Air Fitting (not included)
In order to use the G10 pneumatic polisher you'll need to get a 3/8" x 1/4" quick-connect air fitting and using some thread tape attach it to the air inlet. You can pick one of these fittings up plus the thread tape at any hardware store.
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_006.jpg
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_007.jpg
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_008.jpg
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_009.jpg
:dblthumb2: :buffing: :dblthumb2:
What's in the box?
Let's take a look!
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_001.jpg
Included in the box are,
Griot's BOSS G10 Pneumatic Polisher
24mm wrench
Owner's manual
Pictures but not included
5" Griot's Vented Orbital Backing Plate
6" Griot's Vented Orbital Backing Plate
The G10 pneumatic polisher comes equipped with either a 5 or 6 inch vented backing plate (your choice).
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_002.jpg
The G10 pneumatic polisher has the shape of a traditional pneumatic palm sander except she's a little smaller than average sized palm sanders making it lighter in weight and very easy to hold and grip.
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_003.jpg
The Paddle Throttle Control lever like most palm sanders is located at the top of the tool. As you grip the tool the palm of you hand depresses the lever bringing the polisher up to the speed set by the throttle.
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_004.jpg
The owner's manual is well written, comprehensive, detailed and complete. It walks you through how to assemble the tool for use plus recommendations for best performance when correcting, polishing and waxing paint.
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_005.jpg
Quick-Connect Air Fitting (not included)
In order to use the G10 pneumatic polisher you'll need to get a 3/8" x 1/4" quick-connect air fitting and using some thread tape attach it to the air inlet. You can pick one of these fittings up plus the thread tape at any hardware store.
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_006.jpg
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_007.jpg
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_008.jpg
http://www.marine31online.com/gallery/data/583/Griots_BOSS_G10mm_009.jpg
:dblthumb2: :buffing: :dblthumb2: