View Full Version : Aqua Wax Question
Darren F
10-04-2007, 09:31 AM
I went out and bought Eagle One Nano Wax Spray to hide some swirls I have until I get a chance to properly get rid of them. What I am wondering is can I now top the Eagle One with Aqua Wax to try and prolong the time until the swirls get noticable again?
Surfer
10-04-2007, 01:12 PM
AW will be fine.
Al-53
10-04-2007, 01:16 PM
Thats a combo someone on Topia uses...they use the nanowax first to hide swirls and then top it later with AW and said it works fne
AL
Larry A
10-04-2007, 06:11 PM
Ive did it and it works.3 coats of AW a day apart also HIDES some swirls.
I'm addicted to AW. I'm not sure if it's the smell, or the fact that it works so well, or what. But I could throw everything else away and just keep that and be a happy camper.
dengood1
10-05-2007, 08:50 AM
I'm addicted to AW. I'm not sure if it's the smell, or the fact that it works so well, or what. But I could throw everything else away and just keep that and be a happy camper. Mix it with some #521 for a great weekly QD++!!! #521 is some good stuff!!
Rsurfer
10-05-2007, 11:32 AM
Mix it with some #521 for a great weekly QD++!!! #521 is some good stuff!!Have both, what would be the mix ratio?
dengood1
10-05-2007, 11:53 AM
Have both, what would be the mix ratio?
70/30 and up(more 521, less 951)
Darren F
10-05-2007, 12:30 PM
Does AW need time to cure?
Rsurfer
10-05-2007, 02:24 PM
Mix it with some #521 for a great weekly QD++!!! #521 is some good stuff!!Thxs dengood1, will try it out.:cheers:
netspec
12-05-2007, 02:09 PM
Mix it with some #521 for a great weekly QD++!!! #521 is some good stuff!!
dengood1,
Why mix AW with #521 instead of #921?
Mike T
12-05-2007, 02:20 PM
Not sure about 921, but 521 as some anti-static properties as well as being a great QD. I have never used 921 so I don't know how they compare. I do use the AW/521 mix on my wifes car and its a great combo.
RTexasF
12-05-2007, 04:29 PM
Does AW need time to cure?
It is a spray sealant and always looks even better the next day so I would say yes.
justin_murphy
12-05-2007, 05:11 PM
By the way, EO Spray Wax is really good. I've seen 4+weeks durability out of it with good surface prep. Works really well on laminated interior parts too. I also use it on wheels.
I really couldn't tell you about mixing AW and this product though.
dengood1
12-05-2007, 06:57 PM
dengood1,
Why mix AW with #521 instead of #921?
#521 is for marine use and has some additional properties(more cleaner) because it is made for a more harsh environment. I'm sure either 521 or 921 would be fine.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.