Pictures and comments: Marine 31 Boat Detailing Class - February 6th, 2016

[Mike Phillips]

Pictures and comments: Marine 31 Boat Detailing Class - February 6th, 2016 (http://www.autogeekonline.net/forum/marine-31-boat-detailing-classes/98557-pictures-comments-marine-31-boat-detailing-class-february-6th-2016-a.html)



Announcement: The next boat detailing class will be held on Saturday, February 4th, 2017.

We only teach this class ONCE a year.

So reserve your seat and share the link to this thread with your friends that would like to attend.


Marine 31 Boat Detailing Class - Saturday February 4th, 2017 (http://www.autogeekonline.net/forum/marine-31-boat-detailing-classes/104252-marine-31-boat-detailing-class-february-4th-2017-most-hands-class-available-u-s.html)






Here's before shots the owner sent me...

http://www.marine31online.com/gallery/data/577/Boat_Detailing_Class_0001.jpg

http://www.marine31online.com/gallery/data/577/Boat_Detailing_Class_0002.jpg

http://www.marine31online.com/gallery/data/577/Boat_Detailing_Class_0003.jpg

http://www.marine31online.com/gallery/data/577/Boat_Detailing_Class_0004.jpg




Test Spot

After the boat arrived to Autogeek I did some testing to dial in the process the class would use to restore the gel-coat finish.


Lighting is crucial to see the true and accurate condition of any type of finish including boats with gel-coat exteriors. This boat has a lot of DEEP oxidation but to the untrained eye, it might not look that bad with overhead florescent lights.


http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0013.jpg



Here's a Swirl Finder Light lighting up the side of the boat. Not only is the gel-coat cloudy looking if you look to the left hand side of the light on the hull you'll see

HOLOGRAMS

Holograms are those wispy lines you see and what these are specifically are a SCRATCH patter instilled by a wool pad on a rotary buffer.

http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0014.jpg


See them?

http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0015.jpg

http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0016.jpg

http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0017.jpg

http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0018.jpg



Here I've taped off my test area....

http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0022.jpg



In the center of the taped-off area I've


Machine sanded twice
Compounded with a rotary buffer
Polished with an orbital polisher





On the left side you can see holograms and oxidation...

http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0023.jpg



On the right side you can see holograms and oxidation...

http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0024.jpg



And in the center section is what a gel-coat looks like when it's corrected the right way.

http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0025.jpg



At this point, the Test spot has been,


Chemically strip
Installed Marine 31 Captain's UV50 Ceramic Coating


http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0026.jpg



The right tools to do the job correctly job...

http://www.autogeekonline.net/gallery/data/3165/Boat_Detailing_Class_0027.jpg



The compound/polish used with both tools shown above is the same product the class used to do the entire boat.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_062.jpg





:buffing:

[70fastback]

http://www.marine31online.com/gallery/data/577/Boat_Detailing_Class_0004.jpg

:buffing:

There used to be decals here, right? Certainly no one put red decals on red paint...can't wait to see the afters of this area!!!

[Mike Phillips]

Continued...



We had a top notch group of guys that attended our Marine 31 Boat Detailing Class here at Autogeek!

Lots of pictures to share showing the class in action!

To start with, here's the Class of 2016 receiving thier Certificates. To all the guys that attended this class. If you want the full size image so you can print out a high quality color picture simply send me an e-mail and I'll send you the file.


Here's the class of 2016

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_002.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_004.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_006.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_008.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_002.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_010.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_012.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_014.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_016.jpg




Michael Abrams

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_017.jpg



Parker Richards

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_019.jpg


http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_021.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_023.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_024.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_027.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_029.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_031.jpg



Rutland Darby

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_033.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_035.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_037.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_039.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_041.jpg


Tom Arnold

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_042.jpg


Great job guys!


And if you ever have any questions with any future boat detailing project you can alway get help by calling me or e-mailing me.


1-800-869-3011 x206

Or

mike.phillips@autogeek.net




:)

[joecollectin]

Mike,

Are you going to post any more of the pictures from the class? Maybe I missed the thread but haven't seen any of the 1,000 pics that Andre took.

[kaliagent2001]

Hey Mike sorry to bug but was wondering if there were any updates on the pictures and maybe what was used? Summertime is approaching so want to make sure I have a game plan ha. As always thanks for your shared experiences and knowledge of the detailing game.

[Mike Phillips]

Continued....


Fully stocked
Here at Autogeek we have a fully stocked, ready to rock training center. Besides having ALL the coolest and newest tools, pads and product in the automotive and boat detailing industry we also have a spacious, well-lit training classroom with plenty of room for all the students to be comfortably seated and lots of elbow room for taking notes or simply having a place to set your cup of coffee.


Cool running
Our Training Center is also hyper air-conditioned. We can turn the temperature down to 68 degrees in the middle of a HOT South Florida summer and freeze meat. So rest assured, you're going to be comfortable as you're learning and working.


HANDS-ON
Look at the first picture below... see the people sitting in chairs? That's probably less than 10% of any class we hold here at Autogeek. By this I mean there's very little butt-time at any class I'm involved with as I know from years of experience teaching others the craft and art of detailing that people learn best by doing not sitting in a chair listening to someone drone on and on and on about how great they are or their products.


Powered-up!
Our Training Center isn't just a garage... it's purpose-built for training classes. What does this mean? Besides being air-conditioned and fully stocked, it's fully wired to handle having up to 30 buffers plugged-in and running under load at one time without blowing a breaker. Think about and let that sink in... this is what separates a pro-grade learning experience from the wannabes.


Comfortable training classroom
http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_043.jpg



Tools, tools tools...
We have enough of every type of tool used in the industry for every student to have their own polisher and the power to back them up.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_044.jpg



Wet sanding
At our classes we cover both hand sanding and machine sanding. You learn to work smarter instead of harder. Yeah I know that's a cute catch-phrase people throw around loosely but we walk the talk here at Autogeek's Show Car Garage.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_045.jpg



Hand sanding
Hand sanding is an important skill to have under your belt because there are times and areas where it can be difficult if not impossible to machine sand. Hand sanding requires more skill than machine sanding as you're using the human hand to do the work and besides the human hand you're also power it up with both your muscles and your brain. This is why head knowledge is just as important if not more important than muscle power when it comes to hand sanding.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_047.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_046.jpg



Nikken Finishing Papers
When it comes to hand sanding, one way to work smarter instead of harder stars with abrasive technology. Nikken is an electronics grade finishing paper not a basic wet/dry sanding paper. There's a difference and in the class I explain the difference and even demonstrate the difference.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_048.jpg



Using your brain not your brawn....
How about not having to grip a sanding block when hand sanding to remove severe oxidation? I'll show you how in our boat detailing class.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_049.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_050.jpg



Machine sanding
Gel-coats oxidize easy. Running a rotary buffer and pushing hard for hours is hard. Hard on you and hard on the buffer. I'll show you how to minimize the hardest part of gel-coat restoration by working smarter instead of harder. Plus you'll get better results that last longer.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_051.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_052.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_053.jpg




The BEAST!
The FLEX 3401 is the only gear-driven orbital polisher on the market that's worth it's weight in gold. I nicknamed this tool the BEAST when I wrote my FLEX how-to book (http://www.autogeek.net/detailing-books.html) for car detailing. In our boat detailing classes I show you how to turn the FLEX 3401 (http://www.autogeek.net/flex-orbital-polisher.html) into a BEAST of a machine sander that dramatically reduces the time it takes to remove severe oxidation.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_054.jpg



The way of the rotary buffer
The rotary buffer is the most difficult tool to learn how to use and master. That's two things, (use and master). I've been using and teaching others how to correctly use a rotary buffer as long and in most cases longer than anyone still breathing today. I'll show you how to use your body to run the buffer instead of your arms which means you'll save energy and this is important as in most cases, most of you will be buffing out a neglected boat by yourself or with only one or two others helping out. And while I have DeWALT, Makita and 3M brand rotary buffers in the classroom, the tool that gets grabbed first is the FLEX PE14 Rotary Polisher (http://www.autogeek.net/flex-pe14-2-150-rotary-polisher.html).

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_055.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_056.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_057.jpg



A Show Boat Finish
While most people simply want to remove the oxidation and slap on a coat of wax, I'll show you how to use the RUPES BigFoot 21mm Orbital Polisher (http://www.autogeek.net/rupes-bigfoot-lhr21-markii.html) to maximize the gloss and clarity of a gel-coat finish for show car or rather show boat results.

Don't take my word for it... take his word for it... [B]Mike was right... (http://www.autogeekonline.net/forum/boat-marine-craft-detailing/106893-mike-right.html)

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_058.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_059.jpg



The results you see below were created ONLY after three steps....


Sanding
Compounding
Polishing



No wax, sealant or coating has been applied. The process I just demonstrated to the side of this boat is what this class is now going to duplicate to the rest of the boat.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_060.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_061.jpg




Remember, here's where we started...

http://www.marine31online.com/gallery/data/577/Boat_Detailing_Class_0003.jpg




Abrasive Technology - The most important factor

In my opinion and my experience, the most important factor when it comes to getting consistent, professional results the first time and every time starts with using products that use great abrasive technology.

We used the Captain's One-Step Compound & Polish (http://www.autogeek.net/best-boat-compound-polish.html) for both the compounding step with the rotary buffer and wool pads and the polishing step with orbital polishers and foam pads. One product that consistently produces professional results.


http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_062.jpg



Major on the minors
Besides going over the entire process from start to finish on how to restore a severely neglected gel-coat hull, we also go over important steps like protecting emblems and trim components.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_063.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_064.jpg



Next up... the class takes over and get to work

As they get busy I walk around and work with each guy individually, watching their technique and if and when needed offering suggestions for improvements. I tweak their technique to help turn them into a seasoned professional at our classes instead of them spending years making all the common mistakes most people make without attending our class.


:)

[Mike Phillips]

Continued....


Starting with Mirka Abralon #2000 the class start in machine sanding the gel-coat hull.


http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_065.jpg



In this shot you see a Porter Cable 7424XP with a 6" backing plate and Mirka Abralon #2000 grit sanding disc. The white reside you see on the red portion of the hull is called your sanding slury.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_066.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_067.jpg



Damp Sanding
Technically, what you see in these pictures is called damp sanding. It's different than wet sanding in that you use a LOT less water.

Here's why you use less water when damp sanding

A: You don't need or want tons of water as it makes the process very messy.

B: To avoid any shock dangers when machine sanding with electric tools.

NOTE: All our outlets are GFI outlets.


http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_068.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_069.jpg



Here's a student using a FLEX 3401 to damp sand

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_070.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_071.jpg



Here's a student using a Griot's Garage 3" Mini Polisher as a machine damp sander. For this he's using Mirka Abralon 3" sanding discs.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_072.jpg



Another BEAST being used to machine damp sand years of oxidation neglect off the hull.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_073.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_074.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_075.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_076.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_077.jpg



We bring in large boats, usually from 24' to 26' so there's plenty of room for everyone to get lots of hands-on training time. No one is sitting around waiting for a tool or a place to work.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_078.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_079.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_080.jpg


:)

[Mike Phillips]

Continued...



After all the machine sanding is completed it's time to remove the sanding marks. First there's a demonstration on all the important techniques for using a rotary buffer correctly and then the class is turned loose. As they are buffing I'll be walking around watching and when needed, offering suggestions or tweaking technique.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_081.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_082.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_083.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_084.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_085.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_086.jpg


Working clean
Anytime you're doing an aggressive compounding step to gel-coat you're going to get 2 things building up on the face of your pad,

1: Spent product - Like the name implies, this is the compound that is spent or used-up. After buffing it the chemical make-up of the product changes to a residue that will build up on the surface of the hull and the face of the pad.

2: Removed gel-coat - Like the name implies, because you're abrading the hull you're going to remove particles of gel-coat or pigmented polyester resin. This residue will build up on the hull and on the face of the pad.


It's important to clean you pads often when compounding gel-coats boats with wool pads, aggressive compounds and rotary buffers. To clean you pads you use a steel pad cleaning spur like you see being used below.


http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_087.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_088.jpg




You can find my article on working clean and residue control written in September of 2010, years before anyone else touched the topic in the link below,

Why it's important to clean your pads often... (http://www.autogeekonline.net/forum/tricks-tips-techniques/28755-why-s-important-clean-your-pads-often.html)



Products used for the compounding step
Here's what we used, Marine 31 Captain's One-Step Compound & Polish with a FLEX PE14 and a Lake Country wool 7.5" cutting pad. FLEX recommend no larger than an 8" pad be used on the FLEX PE14 to avoid overheating the motor but the good news is now days there's a lot of small wool pad options. Back in the old day all we had were 10", 11" and I believe there may have even been 12" pads and these would physically wear you out and the only reason guys used them was because that's all they had in the old days.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_089.jpg



As the sanding marks are removed and the residue is removed the clarity can be seen via the reflections in the gel-coat and this is just the first step after sanding.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_090.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_091.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_092.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_093.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_094.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_095.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_096.jpg



That's how you do it.



:)

[Mike Phillips]

Continued....


Next up... machine polishing

After the compounding step, the next procedure is to take the results achieved by the compounding step to a higher standard. For this we're going to use the same product, that is the Marine 31 Captain's One-Step Compound & Polish only we're going to switch over to the RUPES BigFoot 21mm long stroke orbital polisher (http://www.autogeek.net/rupes-bigfoot-lhr21-markii.html) and the RUPES course blue foam cutting pad (http://www.autogeek.net/rupes-foam-pads.html).



Foam cutting pad for polishing to a high gloss?


Yes that's correct.


Until you've taken our class and seen this first hand or take what you've learned from this thread or what I share in my boat detailing how-to book (http://www.autogeek.net/detailing-books.html) it can be hard to believe that you actually get show car, or rather show boat results by using a foam cutting pad instead of what the normal practice would be and that is to switch over to a soft, gushy foam polishing pad.

As I state in my how-to book, I don't know the specific reason why gel-coat finishes, that is pigmented polyester resin doesn't like soft foam pads for polishing all I know is it doesn't. Gel-coats like a firm hard pad for both cutting and polishing. We switch over to foam because it is the nature of foam to remove the risk of hologram scratches. Unlike a wool cutting pad made up of millions of individual fibers, with each one of these fibers able to CUT into the gel-coat and leave a scratch, a flat foam pad has a uniform surface texture, the opposite of millions of individual fibers and it is this characteristic about foam that makes it better for finishing out hologram-free over even a soft lambswool finishing pad.


Fibers are a form of abrasive - Mike Phillips

Yes you can quote me on that....


Below I go over the techniques for correctly using the RUPES BigFoot 21mm Orbital Polisher with the RUPES coarse blue foam cutting pad and the Captains Compound to refine the results from the compounding step and as the guys are working their magic I walk around and watch each guy to make sure they're using the correct technique. For anyone new to long stroke orbital polishers there's a few tips and techniques that go a long way to making this a very easy tool to use while getting maximum performance. I cover these in my RUPES how-to book here (http://www.autogeek.net/detailing-books.html).


http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_097.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_098.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_099.jpg


Don't be shocked or surprized... it's normal when working on pigmented gel-coats to pull color anytime you're compounding or polishing or even if you're using a one-step cleaner/wax or AIO. (cleaner/wax and AIO mean the same thing)

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_100.jpg



The RUPES MINI has a 3" backing plate and uses a 4" pad so you can get into tight areas

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_101.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_107.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_102.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_103.jpg



In the right hand side of the picture that's me buffing around the boat registration letters so the gel-coat in and around the lettering looks just as good as the larger sections of the hull. This type of surgical work with a 21mm long stroke orbital polisher requires you to use the technique I share on page 64 of my RUPES book.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_104.jpg



Starting look like a big read mirror!


http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_105.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_106.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_108.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_109.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_110.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_111.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_112.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_113.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_114.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_115.jpg



The polishing step is over. Check out the red/blue pads in the bottom, left hand corner of the above picture.




:)

[Mike Phillips]

Continued....


Last step for the hull...


Sealing the gel-coat

Sharing where to find the machine waxing chapter in the boat detailing book. When I wrote this book it was dual purpose,

1: To provide accurate information on how to detail boats in any condition from new to years of neglect and using any tool, rotary buffers an every type of orbital polisher. I even include in-depth sections on how to work by hand if a guy feels like getting a great work out.

2: To act as the course manual for this class.


http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_116.jpg




Everything we do in the class is in the book. While the book showcases Marine 31 products, the tools, tips and techniques will work with any other brand of high quality products.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_117.jpg



To seal the gel-coat we're going to use simple dual action polishers with black foam finishing pads from Lake Country. Looks like the Lake Country ThinPro pads by the pictures and these are great for machine waxing because they are thin and this means they won't absorb all your valuable wax like a thick pad will.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_118.jpg



Marine 31 Gel Coat Carnauba Wax + Sealant

This is a non-cleaning blended product that uses both naturally occurring Carnauba wax plus man-made or synthetic protection ingredients. In my opinion, blended products also called hybrids, tend to last longer since you're getting benefits from multiple protection ingredients instead of a single ingredient.

Because this is a non-cleaning product, it can only be used on brand new boats or boats in like-new condition. This boat started out severely oxidized but because we saned, compounded and polished the gel-coat to perfection it is now the definition of like-new. Thus this is the appropriate product to use to seal the gel-coat. Remember, compounds and polishes tend to be water soluble, this means while they may create a great looking finish, the leaving nothing behind to coat over and protect the gel-coat. So it's important to always follow compounding and polishing with a dedicated product and a dedicated step to seal the surface.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_119.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_120.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_121.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_122.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_123.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_124.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_125.jpg




Apply a thin layer and allow to dry to a haze

This is what you want... it's a thin layer or a thin coat of wax uniformly spread over the entire gel-coat surface. Always read the directions for any wax or sealant you use. The directions for this product state to allow the product to fully dry before removing and this is important. The lead guidance for directions starts with the chemist who creates the formula so due respect where respect is deserved.


http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_126.jpg





:)

[Mike Phillips]

Continued....


Final results....


After wiping off the wax and also detailing the interior,


http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_127.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_128.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_129.jpg




Here's the final results...

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_136.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_137.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_138.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_139.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_140.jpg



The owner was ecstatic!

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_141.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_142.jpg



Time to take her home...

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_143.jpg


Excellent work everyone!



:dblthumb2:

[Mike Phillips]

Continued....


Certification Awards

After completion of the class, each student receives a framed certificate of completion. If you do a search on Google for hands-on boat detailing classes in the U.S.A or even the world, it's hard to find one that is as intense and hands-on as this class. At our classes you learn by doing, not watching and not sitting. You EARN your certificate. And when you leave here you'll know exactly what to do for any boat detailing project that comes your way.




http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_130.jpg

http://www.autogeekonline.net/gallery/watermark.php?file=107766



Each student also receives a free copy of my book,


How to Detail Boats with Marine 31 (http://www.autogeek.net/detailing-books.html)

http://www.marine31online.com/gallery/data/532/Boat_Cover.jpg


Like mentioned previously, while this book showcases the Marine 31 line of premium quality boat detailing products, the actual techniques shared will work with any quality brand of products.

The index (http://www.autogeekonline.net/forum/marine-31-boat-detailing-classes/97252-paperback-book-how-detail-boats-marine-31-mike-phillips.html) is 6 pagers long. The index is in-depth and the book is even more in-depth.




And of course, after the class I'm always happy to sign your copy.

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_131.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_132.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_133.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_134.jpg

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_135.jpg



:)

[Mike Phillips]

Continued....


Our boats classes start early and except for a few short breaks and lunch, they are non-stop, fast-paced learning fun.


Andre Hile

I would be remiss if I didn't say thank you to and give credit to Andre Hile, my co-worker and assistant for these classes. Andre took Nick's place as Nick moved up the ladder here at Autogeek and is a top notch boat and car detailer himself. Andre makes sure everyone has everything they need including, extension cords, (plugged in too), tools, pads, microfiber towels, products etch.

Andre is an valuable asset in the class and later after the class should anyone want to order any of the tools, pads, products or supplies they used Andre is distinctly familiar with everything sold on Autogeek.com


Andre working a FLEX PE14 into tigh areas on the back of a 2000 Baja 232 Boss High Performacne Day Cruiser

http://www.marine31online.com/gallery/data/512/24_Baha_Boat_030.jpg



And this is a self portrait shot Andre took of himself while taking all the pictures you've seen in this thread. He's also a pretty damned good photographer!

http://www.autogeekonline.net/gallery/data/3165/2016_Boat_Class_144.jpg



Thank you Andre!



:dblthumb2:

[Mike Phillips]

Coming up in February....


Our boat detailing class is only held ONCE a year, typically after the Stuart Boat Show and before spring gets here. This year the class will be held on


Saturday, February 4th from 7:30am to 5:30pm



The class always fills up and a week or two before the class there's always a rush to try to get into the class. If you missed last years class then don't wait. Reserve your space today. To register for this class


Call Andre at

1-800-869-3011 x244


Or click the link below to sign-up online,


Click here to register online (http://www.autogeek.net/mike-phillips-boat-class.html)




The price of this one day class is $450.00 and this includes a full day of intense hands-on training on a real-world boat like you would find in the boat detailing business.

The class also includes,


Donuts and coffee in the morning
Pizza lunch
Complimentary copy of How to Detail Boats with Marine 31, which is also the course manual for the class.




More information about the class here,


Marine 31 Boat Detailing Class - Saturday February 4th, 2017 (http://www.autogeekonline.net/forum/marine-31-boat-detailing-classes/104252-marine-31-boat-detailing-class-february-4th-2017-most-hands-class-available-u-s.html)




:)

[Mike@DedicatedPerfection]

Beautiful transformation Gentlemen!