ignited22
01-31-2016, 12:57 AM
Hey everyone. I just wanted to give an update to the post I made back on 1/20. I was doing a cut, polish, and seal on my mother-in-laws 2005 black mustang for her birthday. I ran into the following below...
http://i.imgur.com/lHJXZHk.jpg
It turned out I didn't have the right products to properly address this pitting. After some discussion with forum members, I decided to pick up a lake country wool buffing pad for the Flex 3401xc and some Meg's 105 and 205. I am happy to report that most of the pitting is gone after a few passes and really engaging the paint. There are still some around, but I didn't want to run the risk of eating clear for blemishes you have to struggle to see. I highly recommend these products.
After...
http://i.imgur.com/JFyCaS4.jpg
From a normal distance...
http://i.imgur.com/VxmVam0.jpg
Thanks again all!
http://i.imgur.com/lHJXZHk.jpg
It turned out I didn't have the right products to properly address this pitting. After some discussion with forum members, I decided to pick up a lake country wool buffing pad for the Flex 3401xc and some Meg's 105 and 205. I am happy to report that most of the pitting is gone after a few passes and really engaging the paint. There are still some around, but I didn't want to run the risk of eating clear for blemishes you have to struggle to see. I highly recommend these products.
After...
http://i.imgur.com/JFyCaS4.jpg
From a normal distance...
http://i.imgur.com/VxmVam0.jpg
Thanks again all!