High line paint meter thickness gauge

[mbkite]

I have one on the way.. I did do a search.. And did find some good info..
But any recommendations on how to use it how to learn how to use it.. Thanks..

[AGOatemywallet]

Always remember that it is a tool that allows you to ESTIMATE how much paint you have to work with

[hdez]

There is one that is made by "all-sun", these are the specs:


This tester is designed to not-destructively measure the thickness of non-magnetic coatings (including
paint, enamel, plastic, epoxy, etc) on iron, steel or aluminum.


Measuring Range: 0.0mm to 2.0mm, 0mil to 80mil
Accuracy: 2%rdg ±0.1mm, or 2%rdg ±4mil
Note: Accuracy is guaranteed at the operating temperature of 23°C±°C and relative humidity of not more than 75%.
Resolution: 0.1mm/1mil
Power Supply: 1 x 3V button cell, CR2032 or equivalent (Not included)
Operating Environment: Temperature: 0-40°C
Relative Humidity: <80%
Temperature Coefficent: 0.05x(2%rdg±0.01mm,or 2%rdg±4mil)/°C (<18°C or >28°C)
Storage Environment: Temperature:-10°C to 50°C Relative Humidity:<80%
Size: 6.9 x 3.8 x 2cm
Weight: About 23g (including button cell)


For $18.00 USD, I think won't hurt to try it :).

[Sharply Dressed]

I have one on the way.. I did do a search.. And did find some good info..
But any recommendations on how to use it how to learn how to use it.. Thanks..

Research on the net and view videos. There are several that show how to calibrate and use it. Good luck.

[Sharply Dressed]

I have one on the way.. I did do a search.. And did find some good info..
But any recommendations on how to use it how to learn how to use it.. Thanks..

Here's one link I find as an a example.

https://www.youtube.com/watch?v=8VY-20oQ_cU

[mbkite]

Thanks all it should be here Friday