Wolfgang Sealant

[kayakguy]

Would like to apply multiple coats of Wolfgang Sealant. Can the second coat be applied immediately after the first.

[Rsurfer]

Would like to apply multiple coats of Wolfgang Sealant. Can the second coat be applied immediately after the first.no, you need to let it cure for 12 hrs.

[gary26]

Yes, 12 hours and car should not get wet in those 12 hours.:iagree:

[kayakguy]

Thanks folks, appreciate your advice!!

[supercharged]

Would like to apply multiple coats of Wolfgang Sealant. Can the second coat be applied immediately after the first.
wait 12 hours minimum...for higher humidity climates I'd wait 24 hours...

[ScottB]

add polycharger and you should be able to do two coats back to back, I do with UPP.

[klumzypinoy]

12 hour cure :) I just used this stuff last night and it's a breeze to work with. Easy application. I buffed off after 40 minutes, I should have waited a little longer so it would be super easy to buff off. It was still easy but I just had to make a few more passes with the MF, no pressure or elbow grease or anything :).

[Bonifax]

Would 2 coats be more resistant than one, I mean "really"?

[gary26]

Two coats is more for making sure your getting coverage because it gets applied so thin.

[klumzypinoy]

Would 2 coats be more resistant than one, I mean "really"?

2 coats is basically just for coverage. I always put one coat. I'm not sure if it gives more longevity, but I'm sure the wolfgang paintwork polish enhancer would help it have some longevity since it's a good base for the sealant and it cleans the paint.