PDA

View Full Version : Snappy Pad Cleaner



Mike Honcho
12-26-2015, 04:51 PM
Anyone ever use it to clean MF towels, too? Reason I ask is because I need to wash about 6-7 pads and figured I would throw the edgeless towels that have FG400 and LSP on them into the bucket, too.

Ricorocks
12-26-2015, 05:23 PM
I'm no expert Mike, but this seems similar to DP's pad cleaner "citrus" based. It DP, says okay for, grungy MF's.

I see the logic & might do that with my mf's &, I would then machine wash the mf(s).

Take Care

GSKR
12-26-2015, 05:24 PM
I would separate the pads from the towels. The soap will dilute so fast with all the oils from the products.I use the wind fresh bucket soap from SAMS.

Mike Honcho
12-27-2015, 08:15 AM
Thanks!

Mike@ShineStruck
12-27-2015, 08:34 AM
I had snappy clean in the lil packets
It cleaned my foam pads well but nit so much on my microfiber square applicator
Btw snappyclean makes the DP
I hace a nar of.the DP and pretty sure snappy clean is listed on the label

Ricorocks
12-27-2015, 09:38 AM
No reference to Snappy on my DP pad rejuve.

Mike@ShineStruck
12-27-2015, 10:27 AM
Yeah youre right
But its on the description of the product link

Heres a clipping
From the manufacturer of Snappy Clean, this concentrated powder dissolves in water to create the ultimate pad cleaning solution. Detailer’s Pro Series Polishing Pad Rejuvenator

Ricorocks
12-27-2015, 12:35 PM
Is sappy a yellow color?

DP says 29.6 cc (one scoop) = 2 - 4 gallons. cost $24.99 for 16oz.

Which is cheaper?

ski2
12-27-2015, 01:00 PM
Is sappy a yellow color?

DP says 29.6 cc (one scoop) = 2 - 4 gallons. cost $24.99 for 16oz.

Which is cheaper?

29.6cc is about 1 oz so you'd get 16 bucket fulls of DP for $24.99.

Snappy is one packet per 2-4 gallons at $1.29 each (although I have seen it less expensive) so $20.64 for 16 buckets of Snappy.

Ricorocks
12-27-2015, 05:33 PM
Hi Ski2 - Thanks I was in the middle of 2nd coat of Cloinite 476s, & was allowing 8min cure time, so I was in between.

Then windows 10 screwed up & needed to re-install. Done & Done for the day