Need some advice.

[yellow05gt]

Currently working on my 05 Mustang GT and need some guidance. So far I have washed the car, use clay bar, and washed it again. I plan to use in the following order, Meguiars M205, Duragloss 601 PBA, and finally Duragloss 105 TPP. Now, should I skip the Duragloss 601 PBA and go straight to Duragloss 105 TPP? I have a feeling that the DG 601 PBA will remove whatever glaze/polish from the M205. Last question, is it ok to use Meguiars #21 Synthetic Sealant or any type of sealant or wax on top of the Duragloss 105 TPP?

[GSKR]

Can't help you on this one ,I'm not a duragloss fan sorry.

[FUNX650]

•After the M205:

1.)
a. Mix together the #105 and #601 @4:1 ratio.
b. Apply this mixture as if it is just one product
c. Apply a layer of DuraGloss #111

2.)
a. Apply a coat of M21 2.0 Sealant
b. Optional: After allowing for M21 to have
~ a 12-24 hour cure-time...Apply a second
coat of M21 2.0...to ensure total coverage.


Bob

[yellow05gt]

Thanks for the info, yeah I'm new to the Duragloss 105 and 601. Came across the DG stuff while I was looking around for sealants. I primarily use Meguiars and decided to give DG a shot.