New For SEMA! Wolfgang Uber Ceramic Coating

[Nick McKees37]

http://ep.yimg.com/ay/autogeek/wolfgang-uber-ceramic-coating-1.gif

Wolfgang Uber Ceramic Coating provides protection measured in years, not weeks or months. This easy-to-apply coating was designed for painted surfaces, glass, wheels, head lights, and hard exterior plastic trim. It’s packaged in a syringe for easy application. Uber Ceramic Coating lasts up to 3 years on painted surfaces, 2 years on wheels and 1 year on glass. It offers protection without compromise. And the shine, it must be seen to believe.

Wolfgang Uber Ceramic Coating blankets your vehicle in a glossy shell of ceramic protection that complements all colors. Black will appear infinitely deep; red will dazzle with bright reflections; white and silver will appear as if molten glass was poured over the finish, giving the appearance that an extra layer or two of clear coat was applied. Regardless of the color of your vehicle, Uber Ceramic Coating will make it shine better than it ever has. Relentless water beading and a self-cleaning effect will keep your car shining bright in between washes.

http://lib.store.yahoo.net/lib/autogeek/wg-uber-c-1.jpg

http://lib.store.yahoo.net/lib/autogeek/wg-uber-c-2.jpg

http://lib.store.yahoo.net/lib/autogeek/wg-uber-c-3.jpg


Wolfgang Uber Ceramic Coating 15cc (http://www.autogeek.net/wolfgang-uber-ceramic-coating.html)

Wolfgang Uber Ceramic Coating 30cc (http://www.autogeek.net/best-ceramic-paint-coating.html)

Wolfgang Uber Ceramic Coating Complete Kit (http://www.autogeek.net/wolfgang-paint-coating-kit.html)

[Zelfiris]

Thanks for sharing Nick!

Can't wait to see reviews on this baby. Up to 3 years? Nice!

[Mike@DedicatedPerfection]

Outstanding! This looks like the bee's knee's of coatings offered by PBMG.

One question comes to mind. If a vehicle is in an accident and paint work is required, what is the prep work needed to ensure bonding of the new paint?

[Nix]

Quick question nick..does this one protect against the swirl marks..i have mazda 6 deep crystal blue and paint is terrible...easy to scratch..so far i am holding off on coating but with the today's deal i might jump on it..

[apthai]

I also have a quick question... I've never used a coating before. What do I use for on going maintenance? WG Uber Rinseless @ detail spray dilution? WG Spirtz Sealant? Thanks!

How hard is it to apply this coating compared to WG DGPS3?

How long does a syringe last after breaking the initial seal?

[Nick McKees37]

Outstanding! This looks like the bee's knee's of coatings offered by PBMG.

One question comes to mind. If a vehicle is in an accident and paint work is required, what is the prep work needed to ensure bonding of the new paint?

Polish, strip and re-coat. If it's fresh paint, wait 30 days. :dblthumb2:


Quick question nick..does this one protect against the swirl marks..i have mazda 6 deep crystal blue and paint is terrible...easy to scratch..so far i am holding off on coating but with the today's deal i might jump on it..

The hard shell of protection it provides is more resistant to swirl marks compared to (soft) clear coat, like on your Mazda or my Subaru. You still need to be careful when you touch the vehicle - ie: wash it, waterless wash, spray detailer, etc.


I also have a quick question... I've never used a coating before. What do I use for on going maintenance? WG Uber Rinseless @ detail spray dilution? WG Spirtz Sealant? Thanks!

How hard is it to apply this coating compared to WG DGPS3?

How long does a syringe last after breaking the initial seal?

Wash it as you normally would. You can use a detail spray to maintain it.

Uber Ceramic Coating is very easy to apply. You'll have it mastered after one panel. :dblthumb2:

Shelf life is approximately 18 months. Store it indoors.

[builthatch]

Outstanding! This looks like the bee's knee's of coatings offered by PBMG.

One question comes to mind. If a vehicle is in an accident and paint work is required, what is the prep work needed to ensure bonding of the new paint?

i don't know a thing about this coating, but body shop technique for a car coated with Opti-Coat, for instance, is no different than anything else - at the minimum, for paint work over existing paint, scuffing will be required and scuffing is going to abrade the coating away since they are actually going to need to go way beyond the microscopic layer of coating and really dig into the existing clear coat.

[Mike@DedicatedPerfection]

Thanks for the feedback gentlemen.

Now that I have access to everything I need in a body shop environment, I may have to do some testing on a spare panel....

[Audios S6]

Polish, strip and re-coat. If it's fresh paint, wait 30 days. :dblthumb2:



The hard shell of protection it provides is more resistant to swirl marks compared to (soft) clear coat, like on your Mazda or my Subaru. You still need to be careful when you touch the vehicle - ie: wash it, waterless wash, spray detailer, etc.



Wash it as you normally would. You can use a detail spray to maintain it.

Uber Ceramic Coating is very easy to apply. You'll have it mastered after one panel. :dblthumb2:

Shelf life is approximately 18 months. Store it indoors.

Thanks for all the clarifications Nick! I'm very excited to have a couple vehicles lined up for this in the next 10 days. Glad my syringe will last that long after opening.

[Marc08EX]

Hi Nick,

I take it that this Wolfgang Ceramic Coating is a lot stronger and will last longer than the other PBMG coatings like the one from Blackfire and DP?

[DetailKitty]

AWESOME!

I may convert to coatings with this :dblthumb2:

[apthai]

Coating is completely new to me but I do know that the surface needs to be completely clean. I still have a 1L bottle of Eraser. Can I use that for the first wipe then do the 2nd wipe with WG Perfekt Finish Paint Prep? I only picked up the 16oz bottle.

[Nick McKees37]

Hi Nick,

I take it that this Wolfgang Ceramic Coating is a lot stronger and will last longer than the other PBMG coatings like the one from Blackfire and DP?

Hey Marc, check out this thread. (http://www.autogeekonline.net/forum/auto-detailing-101/96319-blackfire-coating-updates.html)

[Marc08EX]

Hi Nick,

Another question... Can we re-use the foam applicator included? If so, how do you clean the applicator pad after applying the coating? Just rinse with water or do you need to clean it with APC or degreaser?

Thanks.

[MikeC]

What type of longevity will you get on headlights? What is the shelf life once opened? Thanks