Rod73
10-22-2015, 07:39 AM
Tools/Equipment
Poorboys Wheel Sealant (http://http://www.autogeek.net/pbws.html)
P21s foam applicator (http://http://www.autogeek.net/p21s-wax-applicators.html)
This review took place about 1 month ago as I cleaned the wheels on the right side of the vehicle and applied the product to only the front wheel, which gets hit hardest with brake dust. The vehicle, my roommate's, is a daily driver that is going to get driven.
I seasoned the applicator after putting a typical amount that I would use for a panel; rubbed the wax with my finger onto the applicator.
38154 38155
The product wasn't surgically cleaned as time constraints limited how involved I could get. I have heard some whispers about it being challenging to remove, I did not have that problem all. I buffed it off about 3 to 5 minutes after I applied it.
38156
The product had left a subtle but noticeable glossier appearance to the wheels. In the product description you are encourage to add 2 to 3 layers of this product, for the record I put a single layer of the product on the wheel.
Poorboys Wheel Sealant (http://http://www.autogeek.net/pbws.html)
P21s foam applicator (http://http://www.autogeek.net/p21s-wax-applicators.html)
This review took place about 1 month ago as I cleaned the wheels on the right side of the vehicle and applied the product to only the front wheel, which gets hit hardest with brake dust. The vehicle, my roommate's, is a daily driver that is going to get driven.
I seasoned the applicator after putting a typical amount that I would use for a panel; rubbed the wax with my finger onto the applicator.
38154 38155
The product wasn't surgically cleaned as time constraints limited how involved I could get. I have heard some whispers about it being challenging to remove, I did not have that problem all. I buffed it off about 3 to 5 minutes after I applied it.
38156
The product had left a subtle but noticeable glossier appearance to the wheels. In the product description you are encourage to add 2 to 3 layers of this product, for the record I put a single layer of the product on the wheel.