JetSeal left streaks on Plastic Trim

[thewiz8807]

How do I remove these? Would a typical foam cannon and 2 bucket wash get rid of them? Tried buffing it out with a microfiber towel and it didn't come off. Worried, I applied JetSeal to every part of the exterior of my car lol. All the plastic trim, the rubber seal around my windows, etc. etc.



I was under the impression that JetSeal could be applied to everything. Boy was I wrong. How can I get rid of these white streaks?

[GenesisCoupe]

All purpose cleaner and a soft brush.

[AnthonyGXP]

Some waxes/sealants can be applied to trim and other exterior surfaces. However, the manufacturer's label will state if in fact they CAN or CANNOT be applied to those areas other than paint.

[Joe@NextLevelDetail]

All purpose cleaner and IPA with a scrub brush

[thewiz8807]

Any mentionable cleaners?

[thewiz8807]

Actually would Chemical Guys Citrus Wash and Gloss remove the streaks from the plastic trim?



If not I'm thinking about going to Home Depot and getting some citrus based degreaser and a brush.

[thewiz8807]

Went with Zep's Heavy Duty Citrus degreaser, diluted it about 1:5.3


Was extra careful around my painted surfaces, I did manage to accident wipe some painted surfaces next to the plastic trim (1mm-1cm amount of surface) with a damp microfiber cloth of the diluted mixture.


I applied a paint sealant last weekend so if anything the degreaser won't have harmed the paint but probably removed the sealant right?


Just a little worried. I wiped all surfaces I cleaned dry with a clean/dry microfiber cloth.