What QD for maintaining Fuzion

[Vegas1]

Used Fuzion for the first time this week and I'm thrilled with the results. Just wondering what others have used to maintain the great look.

I was going to try these QD's which I have.

BF Wet Diamond Polymer Spray
Finish Kare 425
Griot’s Speed Shine
Optimum Instant Detailer
Poorboy’s Spray & Gloss

Thanks.

[DBAILEY]

If you just want a straight QD that 's not leaving much behind or changing the look then use the Griot's SS. The FK425 is my favorite QD but it will change the look a bit. The BF spray is very close to the Wolfgang spray in my opinion but that's a spray sealant.

[Vegas1]

Thanks for your input.

[GS2011]

This is what I use: Wolfgang Deep Gloss Spritz Sealant (http://www.autogeek.net/wolfgang-deep-gloss-spritz-sealant.html)
It is not a QD, but does a nice job maintaining the Fuzion, and is quick and easy. The product description states this use as well.

[Joe@NextLevelDetail]

The sonax brilliant shine detailer is pretty awesome i never used it first hand.

But seen reviews and the water repellency is awesome too check it out

[FUNX650]

Used Fuzion for the first time this week
and I'm thrilled with the results.

Just wondering what others have used
to maintain the great look.

Meguiar's D114, diluted to QD-ratio:
"will not leave anything behind"
that will change the great look of Fuzion.
(That is just another way I would define: maintain)


Sorry, but:
I'm afraid I can't say the same
about the "QD-products" you listed.


Bob

[Mask]

Meguiars D114 works great for any LSP ;)

[swanicyouth]

This is what I use: Wolfgang Deep Gloss Spritz Sealant (http://www.autogeek.net/wolfgang-deep-gloss-spritz-sealant.html)
It is not a QD, but does a nice job maintaining the Fuzion, and is quick and easy. The product description states this use as well.


Ding. Ding. This is the right answer. Although it smells bad. FK425 is another good choice.



Meguiar's D114, diluted to QD-ratio:

"will not leave anything behind"

that will change the great look of Fuzion.

(That is just another way I would define: maintain)





Sorry, but:

I'm afraid I can't say the same

about the "QD-products" you listed.





Bob


What's the point of using a QD that leaves "nothing behind"? I never understood this. I apologize for any spelling or grammar mistakes in advance, Bob. I barely graduated high school you know (#152 of 154 students).

[FUNX650]

What's the point of using a QD that leaves "nothing behind"? I never understood this.

I apologize for any spelling or grammar mistakes in advance, Bob. I barely graduated high school you know (#152 of 154 students).
:wow: You done went to wonna those thar big scools! :props:

Anywho...
•The OP stated: "want to
maintain the great look of Fuzion".
-I sure wouldn't suggest any product
that would do otherwise!

My amazement actually is:
I don't understand why anyone else
would suggest otherwise!


And just like the OP:
I want the looks of my current choice
of LSP to "come shining through".
If not: I'd change-up that LSP.


Bob

[Joe@NextLevelDetail]

Ding. Ding. This is the right answer. Although it smells bad. FK425 is another good choice.





What's the point of using a QD that leaves "nothing behind"? I never understood this. I apologize for any spelling or grammar mistakes in advance, Bob. I barely graduated high school you know (#152 of 154 students).

Actually thats one of the most intelligent thing's i have read.

The op said he wanted to maintain the LOOK OF FUZION and the best way to do that is to use something that does not leave anything behind, or change the look.

Good job Bob 👍👍👍

[swanicyouth]

:wow: You done went to wonna those thar big scools! :props:

Anywho...
•The OP stated: "the want to
maintain the great look of Fuzion".
-I sure wouldn't suggest any product
that would do otherwise?

My amazement actually is:
I don't understand why anyone else
would suggest otherwise!


Bob


Dunno if you have used a quality QD - but it never takes away from the look. - only enhances it. Get off the Megs train and try some other products. Megs isn't the end all be all

That was my my high school ranking. In pharmacy school I was #2 out of ~ 120. But, I can't write worth a crap.

[FUNX650]

Get off the Megs train and try some other products.
Megs isn't the end all be all




FK425 is another good choice.
Is this the FK425 you mention directly above:

Finish Kare 425 Extra Slick Final Body Shine, finish care quick detailer, ultra slick detail spray (http://www.autogeek.net/finish-kare-425-detailer.html)

A product from the Company that
was founded by Floyd Meguiar?



Bob

[swanicyouth]

Is this the FK425 you mention above:

Finish Kare 425 Extra Slick Final Body Shine, finish care quick detailer, ultra slick detail spray (http://www.autogeek.net/finish-kare-425-detailer.html)

A product from the Company that

was founded by Floyd Meguiar?







Bob


Yup. That's it. I know who it was founded by.... Who cares? Have you tried this product over Fuzion? I have.

[custmsprty]

This is what I use: Wolfgang Deep Gloss Spritz Sealant (http://www.autogeek.net/wolfgang-deep-gloss-spritz-sealant.html)
It is not a QD, but does a nice job maintaining the Fuzion, and is quick and easy. The product description states this use as well.

Being a continuous user of Fuzion I'd totally agree with this or WG

Wolfgang Instant Detail Spritz (http://www.autogeek.net/wolfgang-instant-detail-spritz.html)

Wait for a sale and buy a 64 / 128 oz put up. Stay within the WG family. I have tried numerous other detail sprays and my best results have been with these two of which I have both in gallons.

[Joe@NextLevelDetail]

Is this the FK425 you mention directly above:

Finish Kare 425 Extra Slick Final Body Shine, finish care quick detailer, ultra slick detail spray (http://www.autogeek.net/finish-kare-425-detailer.html)

A product from the Company that
was founded by Floyd Meguiar?



Bob

Wow lol....... just wow... talk about burn lol