High cut DA pad's: MF or Flashpad?

[4u2nvinmtl]

I'm looking to get some higher cut pads than my Cyan Hydro-Tech pads. What's the general consensus on MF versus Flash pads (which cut more)?

FYI: I have a PC 7424xp DA and use M101 or Menz FG400. My highest cut pad currently is the CarPro denim/velvet OP removal pads, but they are not practical for whole car corrections.

Any and all recommendations appreciated.

[Zubair]

http://www.autogeekonline.net/forum/auto-detailing-101/95076-aggressiveness-these-pads.html

[4u2nvinmtl]

Thanks Zubair, Flash pads it is...

[AGOatemywallet]

I have seen some amazing results, on a wide variety of cars at the Meguiar's TNOG Events; using a variety of DA machines with the DAMC Pads and M100 and D300

The M100 is a great value and cuts quick

D300 does not cut quite as quick, but has a longer working time, if you enjoy that

The care and clean-up of the DAMF Pads is so much easier than the Flash Pads. Just throw them in the washing machine with your MF's. The Flash Pads are more difficult to get completely clean & stain easily; if that bothers you

DAMF wins on price as well

The 3" Flash Pads are fantastic for B Pillars on Lexus, Audi, Etc.

[Zubair]

Just like theres a chart for the most popular polishes and compounds abrasiveness, wish there was one for the popular pad brands.