View Full Version : Scratches in glass
dano126
08-29-2015, 04:54 PM
How does one take out scatches of a windsheild? What pads, compound, machine ?
Rsurfer
08-29-2015, 04:57 PM
How does one take out scatches of a windsheild? What pads, compound, machine ?
Rayon pad, Ceriglass with a rotary.
DaveT435
08-29-2015, 04:57 PM
CarPro glass polishing pads and Ceriglass
haris300
08-29-2015, 05:34 PM
Rayon pad, Ceriglass with a rotary.
CarPro glass polishing pads and Ceriglass
No kidding :)
http://i5.photobucket.com/albums/y179/lookitsharis/IMG_6103_zpsdvcruqdi.jpg
http://i5.photobucket.com/albums/y179/lookitsharis/IMG_6126_zpshu3zoadz.jpg
oldmodman
08-30-2015, 05:49 AM
And don't forget a long afternoon. :xyxthumbs:
DogRescuer
08-30-2015, 06:05 AM
All of the above and a lot of patience glass being very very hard
bugeye
08-30-2015, 10:51 AM
Don't forget to throughly clean and clay the glass as the first step
Dog Rescuer No ICEBERGS for the ARK to hit
expdetailing
08-30-2015, 02:09 PM
Does this job require a rotory? Is using a DA useless?
expdetailing
08-30-2015, 02:11 PM
Dog Rescuer No ICEBERGS for the ARK to hit
No, but a worldwide flood though.
DaveT435
08-30-2015, 02:14 PM
Does this job require a rotory? Is using a DA useless?
You can use a DA.
Rsurfer
08-30-2015, 02:52 PM
You can use a DA.
But it will take you twice as long and you might not remove some scratches that you would with a rotary.
DogRescuer
08-30-2015, 03:05 PM
No, but a worldwide flood though.
No we were told that this would never be aloud to occur again.
DogRescuer
08-30-2015, 03:06 PM
But it will take you twice as long and you might not remove some scratches that you would with a rotary.
The rpm's?
Rsurfer
08-30-2015, 03:13 PM
The rpm's?
600-1000rpm, but it will get messy, as you need to keep the Ceriglass wet.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.