Black paint and melted bugs

[Mike conowingo]

On the hood of my truck had a caterpillar melted on it yesterday so I washed off last night still something there.
This is what I've done so far this morning. Clay bar and wash hood again. Then it used Meguiars 205 still there. Then it went with megs ultimate compound. No difference. Not sure if it should go get 105 ?
Any advice and recommendations is greatly appreciated.
I did try to take pictures but not turning out well at all.
Thanks Mike

[2black1s]

If it won't come out with UC then using another product probably won't do much good. I'd be looking at your process and making a change there before switching products.

[Mike conowingo]

So finally I have been able to remove all etching of bug I used the meg's uc with da using megs Xtra cut disc microfiber. Took a couple of passes. But achieved what I wanted. Now I have to wax hood again.for that I'm using bf black ice.

[Mike Phillips]

So finally I have been able to remove all etching of bug I used the meg's uc with da using megs Xtra cut disc microfiber. Took a couple of passes. But achieved what I wanted. Now I have to wax hood again.for that I'm using bf black ice.


You're lucky.

Often times the damage caused by bug impact and bug guts etching into and then drying on a car's clearcoat finish causes permanent, un-removable damage.


Here's what some people do when taking a long drive during bug season....



http://www.autogeekonline.net/gallery/watermark.php?file=76990

http://www.autogeekonline.net/gallery/watermark.php?file=76991

http://www.autogeekonline.net/gallery/watermark.php?file=76992





:)