What speed on GG6 for Nanoskin pad?

[EKRock2676]

I'm new to using a Nanoskin on a DA and I'm going to be using the Nanoskin autoscrub pad for the first time and was looking for some guidance as to what speed I should use. It's the 6 inch pad, fine grade. I'm guessing as slow as possible to start and work my way up to something effective without generating heat. I'm using GG Speedshine and a GG6. Any input would be appreciated. Thanks!

[Hokie335i]

When I used the nanoskin pad on my gg6 I used speed 1. No need for fast speeds.

[Mike Phillips]

With the GG6 the 1 or 2 setting shoud work.

All you need is enough speed to maintain light pad rotation. This goes for any DA polisher. You don't want the Nanoskin pad to simply jiggle.


:)

[asalesagent912]

With the GG6 the 1 or 2 setting shoud work.

All you need is enough speed to maintain light pad rotation. This goes for any DA polisher. You don't want the Nanoskin pad to simply jiggle.


:)Hey mike while we are on the subject of the nanoskin 6 inch pad.
Is there any difference in the material of the washmitt and the 6 inch DA pad?
The reason i ask is because i bought the washmitt and was wondering if its a problem to use the DA pad by hand in the nanoskin bubble bath too.

[EKRock2676]

Thanks Guys, the GG6 worked best at the number 2 setting with a light touch to keep the pad rotating. It did a great job and was way faster than claying by hand. Ed