View Full Version : Hd Adapt?
Lambo1
07-20-2015, 12:01 AM
Looking for some input from hd adapt users.Thinking about purchasing.I do have hd cut and polish.Thanks in advance.
tdekany
07-20-2015, 01:00 AM
Best of the HD bunch as far as I am concerned.
Lambo1
07-20-2015, 01:06 AM
Thanks! what is most used pad that you pair it with?
tdekany
07-20-2015, 01:11 AM
Pink LC pad that I order from Detailed Image. What polisher are you using?
Lambo1
07-20-2015, 01:13 AM
I have Makita,flex 3401,and 21 Rupes but mostly use cut/polish with Makita lc Orange for cut and white for hd polish
tdekany
07-20-2015, 01:28 AM
You will love Adapt with the pink foam. Also try the HD black Turkish wool pads
Lambo1
07-20-2015, 01:30 AM
yah I did see those on their site.Are you finishing down ok with just adapt?
tdekany
07-20-2015, 12:44 PM
Never, I always use a finishing polish. I want the most gloss possible
Heisenberg
07-20-2015, 12:52 PM
I have had Adapt for a while and I have trouble with my technique.
tdekany: What's the best way to use Adapt with those wool pads? Do you prime them or just use a few small dots?
Lambo1
07-20-2015, 12:56 PM
Ok didn't think so,I seen in another forum a guy said was able to 1 step with it.
tdekany
07-20-2015, 02:26 PM
Ok didn't think so,I seen in another forum a guy said was able to 1 step with it.
Well you can, but I don't stop there - I want a great finish, not a good enough finish.
Lambo1
07-20-2015, 02:37 PM
Agreed!
zmcgovern45
07-20-2015, 02:40 PM
HD Adapt is fantastic... it can certainly be used as a one-step in many cases.
We use it often, but this video was taken on my mother-in-law's Nissan Murano. HD Adapt, Rupes LHR21 on Speed 4, Orange LC Foam. Above average defect removal with no detectable marring/haze which gets my stamp of approval for a successful one step correction.
HD Adapt - Paint Correction - YouTube
Another example on this ZL1 with Adapt on White LC Foam.
2013 Camaro ZL1 - Paint Correction - YouTube
http://www.autogeekonline.net/forum/show-n-shine/90212-starting-year-some-american-muscle-2013-zl1-polished-coated.html
We also have Cut & Polish, yet we use Adapt way more often than either of those two for some reason.
-Zach
sealthedeal
07-22-2015, 10:39 AM
Well you can, but I don't stop there - I want a great finish, not a good enough finish.
What's the work time like for HD adapt ? I have it and used it a couple of times with a GG6 DA and it seems to dry on me after the second section pass (after initial priming, 3-4 dots and 18x18 section, first couple of passes with downward pressure, BnS cutting pad). It doesn't dust in the subsequent passes but no oily/smeary/pad pattern is left and feels like I am doing section passes over dry surface (correction isn't at par with what I get from sonax 4/6 (or even menz PF2500) same technique.
Sent from my iPhone using Tapatalk
malin819
07-22-2015, 10:55 AM
I had the same problems with some paints with HD Adapt
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.