Clayed on tinted window

[frankprozzoly]

My nanoskin is messed up now. It's sticky from the tint. This is stupid to you pros but I had no idea. Is there a way to get this off

[SYMAWD]

Isn't the tint on the inside? You clayed the inside or am I missing something?

[frankprozzoly]

If the tint isn't on the outside I'm getting something that's black and sticking to everything. Super degreaser isn't even taking it off the inside of my bucket 35828

[frankprozzoly]

That's a picture of my clay sticking to the paint after claying the glass. It's just sticking leaving behind whatever is on the window

[frankprozzoly]

What do you think would happen if I tried cleaning the nanoskin with something like mineral spirits

[frankprozzoly]

I ran the clay over trix... could that have done it?

[swanicyouth]

The same ingredients in Trix that dissolves tar ruins the Nanoskin rubber/clay

[TroyScherer]

I ran the clay over trix... could that have done it?


I would guess this is it. The tar "melter" in TRIX will melt the nanoskin rubber.

[custmsprty]

The same ingredients in Trix that dissolves tar ruins the Nanoskin rubber/clay

Yeah I agree, according to their msds it has petroleum distillates in it and that would ruin the rubber for sure.


Section 3: COMPOSITION/INFORMATION ON INGREDIENTS
Substances classified as dangerous according to Directive 67/548/EEC, if present (individually, or
in combination) in concentrations exceeding those defined under 1907/2006.
Name EC Number CAS
Number
Content
(% W/W)
Hazard
Symbol(s)
R-Phrase(s)
Ammonium Sulfanylacetate 226-540-9 5421-46-5 3-25 T R25, R43
Alkyl Ethoxy sulphate -------------- 68585-34-2 1-15 Xi R38, R41
Additional substances, listed according to 648/2004
0.1% or more but less
than 1%
Fragrance
D-Limonene 227-813-5 5989-27-5 10-20 Xn, Xi R10,R38,R50/53,R65
Distillates (Petroleum)
Hydrotreated Light
265-149-8 64742-47-8 4

[frankprozzoly]

Well that was a dumb move. Guess I have to resort to a clay bar.

[custmsprty]

Or maybe back to the Trix to remove that stuff.

[Ebg18t]

I ended up using a medium clay to remove the nanoskin black residue from the paint when it got contaminated (iron-x).

[oceanside]

Isn't the tint on the inside? You clayed the inside or am I missing something?


too funny..

kinda of what I was thinkin :)