spewking
07-14-2015, 06:34 PM
So, I know is in OCD land, but I just finished applying WDGPS via flex onto my pearl white MDX and want to get your feedback on your techniques.
1. Today's sealants are best applied thin and with 2 coats in some cases. How do you judge thin and know you are covering the car adequately but not wasting product?
2. Do you usually use a red pad for LSP application? I chose red over black or gold.
3. How much pressure do you use? I just used the flex weight and dint press down any.
4. How many passes do you make applying LSP? I did 2 passes in each direction on each section. (less than 4-6 for polish)
Thanks.
1. Today's sealants are best applied thin and with 2 coats in some cases. How do you judge thin and know you are covering the car adequately but not wasting product?
2. Do you usually use a red pad for LSP application? I chose red over black or gold.
3. How much pressure do you use? I just used the flex weight and dint press down any.
4. How many passes do you make applying LSP? I did 2 passes in each direction on each section. (less than 4-6 for polish)
Thanks.