AG sell Foam Gun for standard hose??

[LSNAutoDetailing]

Hi All,

I don't have an air compressor (yet) nor a pressure washer (yet).
Does AG make or sell a foam gun that connects to a standard hose?

[rms64]

Sure, here's an example:

Autogeek Quart Foamaster Foam Gun FREE BONUS (http://www.autogeek.net/auqufofogun.html)

Just search on "foam gun" in the store - I believe the versions that require a pressure washer are referred to as "foam cannons".

Hope this helps..:xyxthumbs:

[Ccrew]

Sure, here's an example:

Autogeek Quart Foamaster Foam Gun FREE BONUS (http://www.autogeek.net/auqufofogun.html)

Just search on "foam gun" in the store - I believe the versions that require a pressure washer are referred to as "foam cannons".

Hope this helps..:xyxthumbs:

And I'll add to his recommendation in that the unit he linked actually works quite well. I have one that I use when I don't feel like dragging out the pressure washers and I have no complaints with it whatsoever. You don't need special soap, your regular concentrated car soap works just fine with it.

[LSNAutoDetailing]

Nice! Thank you!

[molarman]

do u need to dilute ur regular soap when using the foam gun? i used the dp soap and it seems too runny when mixing as per directions

[trekkeruss]

Which DP wash product are you using? They make one specifically for foam.

[PA DETAILER]

do u need to dilute ur regular soap when using the foam gun? i used the dp soap and it seems too runny when mixing as per directions

Usually 2oz of soap in the resivor then fill with water. *shake*

Some soaps will foam up better in the gun than others.

[medicscott]

We will be using one on Saturday :)

[Kamakaz1961]

Man I miss my foam gun!! I have it but it's collecting dust. Here in Southern California The Land of the Socialists and Progressives...we have water restrictions and can't use it.

We have the Castapo Water Police monitoring our water usage. But I digress..

IMO the Foam Gun is a great addition to a 2-bucket 2-Grit guard wash.

Make sure you get the foam gun with the brass mixture adjustment tool not the plastic one.

[808_detail_nut]

I have a old one that I still use today. The one with the brass fittings. I lost the top screw so I have to use my finger to plug the hole so I can get good foam. I know I should buy a new one but this one still works. I only really use it on really dirty cars to presoak before I wash. I use megs gold class in it and it never failed to give me a good foam blanket.


Sent from my iPad using Tapatalk